Poulan 1420, 1630 Check for Loose Fasteners and Parts, Check Chain Tension, Check Chain Sharpness

Page 12

S Oil Tank -- Discontinue use of chain saw if oil tank shows signs of damage or leaks.

SPower Cord -- Discontinue use if chain saw power cord shows signs of dam-

age or wear.

CHECK FOR LOOSE

FASTENERS AND PARTS

SBar Mounting Nut S Chain

S Bar Adjusting Screw

CHECK CHAIN TENSION

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use your saw.

1.Unplug unit from the power source.

2.Use a screwdriver to move chain around guide bar to ensure kinks do not exist. The chain should rotate freely.

NOTE: It is recommended that the saw be turned upside down for chain tensioning.

3.Loosen bar mounting nuts until they are finger tight.

4.Turn the adjusting screw clockwise until the chain solidly contacts bot- tom of guide bar rail. Then, turn ad- justing screw an additional 1/4 turn. This is correct chain tension setting.

Adjusting Screw -- 1/4 Turn

NOTE: To tighten the chain, turn the adjusting screw clockwise; to loosen the chain, turn the adjusting screw counter- clockwise.

Adjusting Screw

5.Check the tension by lifting the chain from the guide bar. Remove some of the stiffness in the chain by pulling down on the chain several times.

6.Continue turning the adjusting screw until the tension is correct (see step 4).

7.Tighten bar mounting nuts with a wrench.

8.Recheck chain tension.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious in- jury.

CHECK CHAIN SHARPNESS

A sharp chain makes wood chips. A dull chain makes a sawdust powder and cuts slowly. See CHAIN SHARPENING in the SERVICE AND ADJUSTMENTS section.

CHECK GUIDE BAR

Conditions which require guide bar maintenance:

SSaw cuts to one side or at an angle. S Saw has to be forced through the cut. S Inadequate supply of oil to the bar and

chain.

Check the condition of the guide bar each time the chain is sharpened. A worn guide bar will damage the chain and make cutting difficult.

After each use, with unit disconnected from power source, clean all sawdust from the guide bar and sprocket hole.

To maintain guide bar:

S Disconnect the chain saw from the power source.

S Loosen and remove bar mounting nuts. Remove bar, bar clamp plate and chain from saw.

S Clean the oil holes and bar groove af- ter each 5 hours of operation.

Remove Sawdust From

Guide Bar Groove

Oil Holes

S Burring of guide bar rails is a normal process of rail wear. Remove these burrs with a flat file.

SWhen rail top is uneven, use a flat file to restore square edges and sides.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Español FrançaisSafety Rules Operate Your SAW SafelyPlan Ahead Maintain Your SAW in GoodElectrical Safety Authorized service dealerSaw is driven straight back toward the operator Reduce the Chance KickbackChain Maintain ControlKickback Safety Features CursAssembly Carton ContentsAssembly Double Insulation ConstructionOperation Cutting Methods Before Starting SAW Guide BAR and Chain OILStopping Your SAW Starting Your SAWFelling Large Trees Notch CUT and Felling TreeCutting a Fallen Tree Bucking Important PointsBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points Maintenance Check for Loose Fasteners and Parts Check Chain TensionCheck Chain Sharpness Check Guide BARService and Adjustments Chain Adjustment Customer Serviceable PartsStorage Seasonal StorageTroubleshooting Table Cause Remedy Warranty Statement

1420, 1630 specifications

The Poulan 1420 and 1630 are noteworthy chainsaw models designed to cater to the needs of both homeowners and occasional users, providing efficient and reliable cutting performance. These chainsaws are part of Poulan's renowned lineup, reflecting the brand's commitment to quality and innovation.

The Poulan 1420 is equipped with a powerful 14-inch bar and a lightweight design, making it perfect for light trimming, pruning, and small to medium-sized tasks around the yard. One of its main features is the easy-access air filter, which enhances maintenance convenience and prolongs the life of the engine. The 1420 runs on a 33 cc two-stroke engine, delivering impressive power for its size. Its automatic oiling system ensures that the chain operates smoothly, reducing wear and tear and improving cutting performance.

In addition, the Poulan 1420 boasts an ergonomic handle design for enhanced comfort during extended use. This model is also equipped with a chain brake system that adds an extra layer of safety, allowing the operator to stop the chain quickly in case of an emergency. The lightweight nature of the chainsaw makes it easy to maneuver, making it a favorite among those new to using power tools.

On the other hand, the Poulan 1630 extends capabilities with its 16-inch bar, ideal for larger cutting tasks. This model features a more powerful 40 cc engine, providing robust cutting capabilities that can handle firewood cutting, thicker branches, and larger trees. Like the 1420, the 1630 also supports an automatic oiling system and an easy-access air filter for hassle-free maintenance.

The Poulan 1630 offers additional features like a heavy-duty chain for increased durability, ensuring it can withstand rigorous use. Its ergonomic design continues to be a strong focus, allowing users to work more comfortably and efficiently. Moreover, both models incorporate Poulan’s signature Easy Start technology, which helps reduce the effort needed to start the engine, making operation seamless.

In conclusion, both the Poulan 1420 and 1630 chainsaws are excellent choices for those who seek a blend of performance, reliability, and safety in their outdoor equipment. Whether for light yard work or heavier cutting tasks, these chainsaws are equipped with features that will meet the needs of varied users, promoting ease of use and long-lasting durability. With Poulan's reputation for producing quality products, these models stand out in the competitive chainsaw market.
Top Page Image Contents