Poulan 545137280 instruction manual Operation

Page 10

OPERATION

KNOW YOUR PRUNER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

 

 

 

Assist handle

ON/OFF switch

 

 

 

 

 

 

Coupler

 

 

 

Pruner

 

 

 

 

 

 

 

 

Line trimmer

 

Shaft

Shoulder strap clamp

 

 

 

 

 

 

 

Starter handle

Fuel mix

 

 

attachment

Attachment hanger

fill cap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar oil fill cap

 

 

 

Primer

 

 

 

 

 

bulb

 

Chain

 

 

 

 

 

Shield

 

Throttle trigger

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar

Bar nut

Start lever

 

 

Muffler

 

 

 

 

 

 

 

 

 

ON/OFF SWITCH

 

system by moving the start lever to the START

The ON/OFF switch is located on the trigger

position. DO NOT squeeze the throttle trigger

handle and is used to stop the engine. Move the

until the engine has started and runs. After the

switch to the OFF position to stop the engine.

engine starts, allow the engine to warm--up 5

PRIMER BULB

 

seconds, then fully squeeze the throttle trigger

 

to deactivate the starting system.

 

 

 

The PRIMER BULB removes air from the car-

COUPLER

 

 

 

 

 

 

buretor and fuel lines and fills them with fuel.

The COUPLER enables optional attach-

This allows you to start the engine with fewer

ments to be installed on the unit.

 

 

 

pulls on the starter rope. Activate the primer bulb

 

 

 

CHAIN TENSION

 

 

 

 

 

by pressing it and allowing it to return to its origi-

 

 

 

 

 

nal form.

 

 

It is normal for a new chain to stretch during

START LEVER

 

first 15 minutes of operation. You should

 

check your chain tension frequently. See

The START LEVER helps to supply fuel to the

CHAIN TENSION in the SERVICE AND AD-

engine to aid in starting. Activate the starting

JUSTMENTS section.

 

 

 

 

 

 

 

 

BEFORE STARTING ENGINE

Poulan/WEED EATER brand synthetic oil is

WARNING: Be sure to read the fuel

recommended. Mix gasoline and oil at a ratio

of 40:1. A 40:1 ratio is obtained by mixing 3.2

information in the safety rules before you be-

ounces (95 ml) of oil with 1 gallon (4 liters) of

gin. If you do not understand the safety rules,

unleaded gasoline. DO NOT USE automotive

do not attempt to fuel your unit. Call

oil or marine oil. These oils will cause engine

1-800-554-6723.

 

 

damage. When mixing fuel, follow instructions

FUELING ENGINE

 

printed on container. Once oil is added to

 

gasoline, shake container momentarily to

WARNING: Remove fuel cap slowly

assure that the fuel is thoroughly mixed. Always

read and follow the safety rules relating to fuel

when refueling.

 

 

before fueling your unit.

 

 

 

 

 

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1.

BAR AND CHAIN LUBRICATION

The bar and chain require lubrication. The chain oiler provides continuous lubrication to the chain and guide bar. Be sure to fill the bar oil tank when you fill the fuel tank (Capacity = 4.6 fl. oz.). Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/or discolor- ation of the bar. The oil output is automatically metered during operation. Always fill the bar oil tank when you fill the fuel tank.

10

Image 10
Contents PP446ET Pruner Safety Identification of SymbolsSafety Rules Plan AheadLine Trimmer Safety Kickback Maintain Your Unit in Good Working OrderHandle Fuel with Caution Reduce the Chance KickbackFor Optional Attachments Kickback Safety FeaturesMaintain Control Tion of this toolBrushcutter Safety Edger SafetyBLOWER/VACUUM Safety Always use the handlebar when using edg- er attachmentSnow Thrower Safety Cultivator SafetyHedge Trimmer Safety Curs, stop the engine and inspect the unit for damageShoulder Strap Assembly AssemblyTools Required To Relocate Shoulder Strap Clamp Adjusting the Assist HandleAttaching Shield for Line Trimmer Attachment Operation Starting a Cold Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineInstalling Optional ATTACH- Ments Installing Attachment HangerUpper Shaft Coupler Pruning Technique Pruning Important PointsTrimmer Line Advance Cutting Methods Maintenance Service and Adjustments To Replace Chain Chain AdjustmentReplacing the Line Seasonal Storage Carburetor AdjustmentIdle Speed Adjustment Fuel SystemCompression low Troubleshooting Table Cause RemedyLoad Adjustment Carbon build-up onLimited Warranty Is Covered Repair or ReplaceIntermediate 125 hours Extended 300 hours

545137280 specifications

The Poulan 545137280 is a versatile and powerful gas-powered chainsaw designed to meet the needs of both professionals and avid DIY enthusiasts. Renowned for its durability and efficiency, this chainsaw stands out in the crowded market due to its advanced technologies and ergonomic design.

One of the prominent features of the Poulan 545137280 is its 50cc, 2-stroke engine, which delivers a robust performance, making it ideal for cutting through heavy hardwoods and tackling demanding jobs. This engine not only provides ample power but also ensures that the chainsaw operates smoothly, resulting in less vibration for the user, which enhances comfort during extended use.

The chainsaw is equipped with a 20-inch bar and chain, providing an ideal length for a variety of cutting tasks, from felling trees to trimming branches. The larger bar allows users to cover more ground with each cut, thus increasing efficiency. The sharp chain is designed for optimum performance and quick cutting, ensuring cleaner finishes and reduced kickback for safer operation.

Another standout feature is Poulan’s patented Easy Start technology. This technology significantly reduces starting effort, allowing users to start the chainsaw with minimal effort, even in cold weather. Combined with the choke lever and primer bulb, this system ensures that the chainsaw is ready to go with just a few pulls, minimizing downtime before tackling the next cutting task.

In terms of safety, the Poulan 545137280 incorporates a chain brake system that automatically stops the chain if a kickback is detected, reducing the risk of accidents. The rear handle is ergonomically designed to provide a comfortable grip, allowing for better control during operation. Additionally, the lightweight design of the chainsaw helps reduce user fatigue, making it suitable for prolonged use.

Maintenance is made simple with the tool-less chain tensioning feature that enables users to adjust the chain tension without the need for additional tools. This not only saves time but also ensures that the chainsaw remains in optimal working condition without unnecessary hassle.

In summary, the Poulan 545137280 chainsaw combines power, efficiency, and user-friendly features that cater to both professionals and hobbyists. Its advanced technologies, including the powerful engine, Easy Start system, and enhanced safety features, make it a reliable tool for a variety of cutting tasks. Whether for yard maintenance or professional logging jobs, the Poulan 545137280 proves to be a valuable addition to any toolkit.