Cutting Methods

SOperate the engine at full throttle.

SHold the trimmer head parallel to and above

the grassy area.

STap the bottom of the trimmer head lightly on

the ground one time. Approximately 2 inches (5 cm) of line will be advanced with each tap.

Always tap the trimmer head on a grassy area. Tapping on surfaces such as concrete or asphalt can cause excessive wear to the trimmer head.

If the line is worn down to 2 inches (5 cm) or less, more than one tap will be required to ob- tain the most efficient line length.

WARNING: Use only 0.080” (2 mm) diameter line. Other sizes of line will not ad- vance properly and can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury.

WARNING: Use minimum speed and do not crowd the line when cutting around hard objects (rock, gravel, fence posts, etc.), which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard.

SThe tip of the line does the cutting. You will achieve the best performance and minimum line wear by not crowding the line into the cutting area. The right and wrong ways are shown below.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the

Tip of the Line Does The Cutting

Right

Line Crowded Into Work Area

Wrong

ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat-

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can wrap such as small posts, trees or fence

wire.

SFor mowing or sweeping, use full throttle for a good clean job.

ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

545137280 specifications

The Poulan 545137280 is a versatile and powerful gas-powered chainsaw designed to meet the needs of both professionals and avid DIY enthusiasts. Renowned for its durability and efficiency, this chainsaw stands out in the crowded market due to its advanced technologies and ergonomic design.

One of the prominent features of the Poulan 545137280 is its 50cc, 2-stroke engine, which delivers a robust performance, making it ideal for cutting through heavy hardwoods and tackling demanding jobs. This engine not only provides ample power but also ensures that the chainsaw operates smoothly, resulting in less vibration for the user, which enhances comfort during extended use.

The chainsaw is equipped with a 20-inch bar and chain, providing an ideal length for a variety of cutting tasks, from felling trees to trimming branches. The larger bar allows users to cover more ground with each cut, thus increasing efficiency. The sharp chain is designed for optimum performance and quick cutting, ensuring cleaner finishes and reduced kickback for safer operation.

Another standout feature is Poulan’s patented Easy Start technology. This technology significantly reduces starting effort, allowing users to start the chainsaw with minimal effort, even in cold weather. Combined with the choke lever and primer bulb, this system ensures that the chainsaw is ready to go with just a few pulls, minimizing downtime before tackling the next cutting task.

In terms of safety, the Poulan 545137280 incorporates a chain brake system that automatically stops the chain if a kickback is detected, reducing the risk of accidents. The rear handle is ergonomically designed to provide a comfortable grip, allowing for better control during operation. Additionally, the lightweight design of the chainsaw helps reduce user fatigue, making it suitable for prolonged use.

Maintenance is made simple with the tool-less chain tensioning feature that enables users to adjust the chain tension without the need for additional tools. This not only saves time but also ensures that the chainsaw remains in optimal working condition without unnecessary hassle.

In summary, the Poulan 545137280 chainsaw combines power, efficiency, and user-friendly features that cater to both professionals and hobbyists. Its advanced technologies, including the powerful engine, Easy Start system, and enhanced safety features, make it a reliable tool for a variety of cutting tasks. Whether for yard maintenance or professional logging jobs, the Poulan 545137280 proves to be a valuable addition to any toolkit.