of this tool and seek medical attention. An
RECOMMENDED ATTACHMENTS
This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:
MODEL: Edger . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . PP3000B
WARNING: Use of any other attach- ments besides those listed above and the at- tachment provided with this unit might present a risk of injury to the operator or bystanders. Only those attachments listed above and the attach- ment provided with this unit have been tested for use with this powerhead.
ADDITIONAL SAFETY RULES
FOR OPTIONAL ATTACHMENTS
WARNING: For each optional attach- ment used, read entire instruction manual be- fore use and follow all warnings and instruc- tions in manual and on attachment.
NOTE: Use the assist handle included with your unit (as shown below) when operating the following attachments.
Assist Handle
BLOWER SAFETY
WARNING: Never put hands or other objects into blower housing to avoid serious injury from rotating impeller.
WARNING: Inspect area before starting unit. Remove all debris and hard ob- jects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.
S Inspect unit before each use for worn, loose, missing or damaged parts. Do not use until unit is in proper working order.
SDo not set unit on any surface except a clean, hard area. Debris such as gravel, sand, dust, grass, etc., could be picked up by the air in- take and thrown out through discharge open- ing, damaging unit, property, or causing seri-
ous injury to bystanders or operator.
SNever place objects inside the blower tubes or blower outlet. Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automo-
biles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to rico- chet which can hurt people or animals, break glass, or cause other damage.
SCheck air intake opening and blower tubes frequently, always with unit stopped and power source disconnected. Keep vents
and discharge tubes free of debris which can accumulate and restrict proper air flow.
SNever place any object in air intake opening as this could restrict proper air flow and
cause damage to the unit.
SNever douse or squirt the unit with water or any other liquid. Clean unit and labels with a
damp sponge. Keep handles dry, clean, and free from oil and grease.
SNever use for spreading chemicals, fertiliz- ers, or other substances which may contain toxic materials.
STo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.
CULTIVATOR SAFETY
DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM TINES AND CUTTING AREA. Rotating tines can cause se- rious injury. Do not attempt to clear away cut material or hold material to be cut when the mo- tor is running. Make sure powerhead is stopped and disconnected from power source when re- moving jammed material from the tines. Do not grab or hold attachment by the tines.
WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the unit and disconnect the power source before unclogging tines or making repairs.
WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc.
SHold the unit firmly with both hands
SKeep firm footing and balance. Do not over-
reach or stand on unstable surfaces.
SLook behind and use care when backing up. S Keep all parts of your body away from the
tines.
S Never operate the cultivator without the tine guard in place and properly secured.
S Keep the tines and guard clear of debris. Al- ways wear gloves when servicing or clean- ing the tines. The tines become very sharp from use.
S Avoid heavy contact with solid objects that might stop the tines. If heavy contact oc- curs, stop the motor and inspect the unit for damage.
S After striking a foreign object, stop the unit, disconnect the power source and inspect the cultivator for damage. Repair before re- starting.
S Disconnect attachment from the drive mo- tor before cleaning the tines with a hose and water to remove any
S Do not run unit at high speed unless cultiva- ting.
7