Poulan 810 EP instruction manual Operation

OPERATION

KNOW YOUR PRUNER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

		Assist Handle
Pruner		Coupler
Attachment Hanger Shaft		Shoulder Strap Clamp	Recessed
	Bar oil fill cap
			Plug
Chain		Motor Housing	Cord Retainer
Bar	Bar nut	Trigger Switch

RECESSED PLUG

The RECESSED PLUG is where you attach your extension cord to the unit.

TRIGGER SWITCH

The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switch to operate the unit. Release to stop.

COUPLER

The COUPLER enables optional attach- ments to be installed on the unit.

CHAIN TENSION

It is normal for a new chain to stretch during first 15 minutes of operation. You should check your chain tension frequently. See CHAIN TENSION in the SERVICE AND AD- JUSTMENTS section.

OPERATING INSTRUCTIONS

Use only a voltage supply as specified on your unit.

SELECT AN EXTENSION CORD

Extension Cord Gauge Chart

Length of Cord		Gauge
25	Ft. (7.5 m)	18 Gauge
50	Ft. (15 m)	16 Gauge
100 Ft. (30 m)		14 Gauge

Extension cords are available for this unit.

ATTACH THE EXTENSION

CORD TO YOUR PRUNER

Make a loop in your extension cord and attach the cord as shown. Ensure the plug and cord are firmly and fully engaged.

Cord Retainer

Extension Cord Recessed Plug on Unit

BEFORE STARTING PRUNER

Be sure to read the electrical safety informa- tion in the safety rules section of this manual before you begin. If you do not understand the electrical safety information do not attempt to use your unit. Seek help from someone that does understand the information or call the customer assistance help line at 1-800-554-6723.

GUIDE BAR AND CHAIN OIL

The bar and chain require lubrication. The chain oiler provides continuous lubrication to the chain and guide bar. Lack of oil will quickly ruin the bar and chain. Too little oil will cause

11