Poulan 151673, CG46A, 964 04 06-07 Safety Rules, Safe Operation Practices for Ride-On Mowers

Page 2

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

I. GENERAL OPERATION

Read, understand, and follow all instructions in the manual and on the machine before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the guard in place.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Turn off blades when not mowing.

Stop engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tipover accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.

DO NOT:

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the pres- ence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and under the watchful care of another responsible adult.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build- up. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

2

Image 2
Contents Model No. CG46A Product No 04 Inch Mower Grass Catcher Safety Rules Safe Operation Practices for Ride-On MowersTable of Contents Unpacking Instructions BAG of Parts Contents These are the Tools YOU will Need to AssemblyParts Identification Assemble Your Grass CatcherCover Seal See Fig Rear Mounting BracketUse Hardware - Group a No hardware requiredUse Hardware - Group C No hardware requiredUse Hardware - Group D Upper Chute See a &9B No hardware required See FigUse Hardware - Group E & F Operation Tips for Improved Bagging OperationBlade Care MAINTENANCE,SERVICE or Adjust MentsCustomer Responsibilities Page Repair PARTS/PIÈCES DE Rechange Product Number 954 04 06-07 / Numéro DE Produit 954 04KEY Part Description

151673, 964 04 06-07, CG46A specifications

The Poulan CG46A is a versatile and powerful brush cutter designed for homeowners and professionals alike. This model, part of the Poulan Pro line, is equipped with advanced features and technologies, making it an ideal choice for tackling tough jobs in gardens and yards.

At the heart of the CG46A is its robust 46cc two-stroke engine, which provides ample power for cutting through dense brush and tall grass. This engine, known for its efficiency, ensures that users can complete their tasks quickly without the need for frequent refueling. With a power output that efficiently translates into operation, the CG46A makes light work of heavy vegetation.

One of its key features is the innovative dual-line, auto-feed trimmer head. This head automatically feeds new line as needed, allowing for uninterrupted operation while trimming or edging around flower beds, fences, and sidewalks. This feature minimizes downtime and enhances productivity, making it a favorite among landscapers and garden enthusiasts.

The Poulan CG46A also boasts an ergonomic design for user comfort. Its soft-grip handle reduces vibrations, allowing for extended usage without discomfort. The lightweight design further enhances its maneuverability, making it easy for users to navigate tight spaces and uneven terrain.

In terms of technology, the CG46A incorporates a simple start system that makes it easier to start the engine with minimal effort. This feature is particularly valuable for those who may struggle with traditional pull-start mechanisms. Additionally, the air filter is easily accessible for cleaning or replacement, ensuring optimal engine performance and longevity.

Another notable characteristic of this model is its durable construction. Designed to withstand the rigors of daily use, the Poulan CG46A features high-quality materials that resist wear and tear. The cutting swath of the trimmer is also impressive, providing an effective solution for cutting larger areas in less time.

Overall, the Poulan CG46A brush cutter represents an excellent balance of power, efficiency, and user-friendly design. Whether you need to maintain a home garden or tackle larger landscaping projects, this model is equipped with the features and technology to meet your needs effectively. With its reliability and performance, the CG46A is a valuable addition to any tool collection.