Poulan C36C, 532140600 Customer Responsibilities, Blade Care, MAINTENANCE,SERVICE or Adjust Ments

Page 12

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any main- tenance.

Before each use check for loose fasteners.

Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

See BLADE CARE instructions in your tractor owner's manual.

CAUTION:BEFORE PERFORMING ANY

MAINTENANCE,SERVICE OR ADJUST-

MENTS:

Depress clutch brake pedal fully and set parking brake.

Place gearshift/motion control lever in "NEUTRAL" position.

Place clutch control in "DISENGAGED" position.

Turn ignition key to "OFF" position.

Make sure blades and all moving parts have completely stopped.

Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.

CAUTION: Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

STORAGE

When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place.

CAUTION: Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

12

Image 12
Contents WNER’S Manual Safe Operation Practices for Ride-On Mowers General OperationII. Slope Operation III. ChildrenTable of Contents Know Your Grass Catcher BAG of Parts Contents Assembly Parts IdentificationDeck Mandrel Style a Style B These are the Tools YOU will Need to ASUse Hardware - Group a See Figs a & 2BUse Hardware - Group B Cover Seal See No hardware requiredUse Hardware - Group D No hardware requiredContainer Mounting See Fig No hardware required Use Hardware - Group ESee Fig Use Hardware - Groups F & G11WHEEL Weights See Use Hardware - Group H 10UPPER Chute See Figs a & 10B No hardware requiredLevel Mower Deck Operation Tips for Improved Bagging OperationMAINTENANCE,SERVICE or Adjust Ments Customer ResponsibilitiesBlade Care Drill Hole in Mower Deck Housing See PreparationRepair PARTS/PIÈCES DE Rechange KEY Part Description Description KEY PartPage Hole