Oregon Scientific BAR988HGA, BAR986HGA user manual Barometer, Set Pre-Alarm, Activate Alarm, Snooze

Page 17

EN

2.Press ALARM / to view the alarm. (AL will show at the top.)

3.Press and hold ALARM / for 2 seconds.

4.Select the hour and minute. Press UP or DOWN to change settings.

5.Press ALARM / to confirm.

6.The Daily Alarm icon will appear when the alarm is set.

SET PRE-ALARM

The Pre-Alarm can be set to sound 15, 30, 45, or 60 minutes before the Daily Alarm. It will sound whenever the recorded temperature from Channel 1 Sensor falls to 35.6°F (2°C) or below.

For example, if you set the alarm to 7:00 AM, and the Pre-Alarm to 45 minutes, the Pre-Alarm will sound at 6:15 AM provided the outdoor temperature at Channel 1 Sensor is 35.6°F (2°C) or below.

1.Set up and activate the Daily Alarm.

2.Press ALARM / to switch to Pre-Alarm view. (PRE-ALwill show at the top.)

3.Press and hold ALARM / for 2 seconds.

4.Press UP or DOWN to select 15, 30, 45 or 60 minutes. This is the amount of time the Pre-Alarm will sound BEFORE the Daily Alarm. The Pre-Alarm is automatically activated when you select a time.

5. Press ALARM / to confirm.

shows when the Pre-Alarm is set.

NOTE The Daily Alarm will NOT function until the next day if the Pre-Alarm has been triggered. Also, if you deactivate the Daily Alarm, the Pre-Alarm is automatically deactivated.

ACTIVATE ALARM

Navigate to the Clock Area, then press ALARM / to switch to Daily Alarm or Pre-Alarm view. To activate or deactivate the alarm, press UP or DOWN.

When the alarm time is reached, the backlight will be on for 8 seconds and crescendo alarm will sound for 2 minutes. Press any key (except snooze) to silence the alarm. It will sound at the same time the next day.

SNOOZE

Press SNOOZE / LIGHT to temporarily disable the alarm for 8 minutes. or will blink while snooze is on.

BAROMETER

This product tracks fluctuations in barometric pressure to provide the weather forecast, and the current and past 24 hours barometric pressure history measurements are

recorded by the main (indoor) unit.

16

BAR988HGA English R5

16

9/18/04, 3:00 AM

Image 17
Contents Treviso Sleek Weather Station Treviso Sleek Weather Station Model BAR988HGA / BAR986HGA ContentsDeclaration of Conformity Introduction Front View EN Product OverviewBack View LCD Display Weather Forecast Area UVI / Barometer Area Remote Sensor RTGR328NA Batteries Reset Search ZoneGetting Started Remote Sensor Change SettingsUnit Location AC Adaptor Main UnitSwitch Option SET UP Thermo / Hygro Sensor RTGR328NSensor Data Transmission Clock and CalendarIcon Description Search for SensorTurn Atomic Clock on / OFF Atomic ClockIcon Meaning Switch Clock Display AlarmsSET Daily Alarm SET ClockActivate Alarm SET PRE-ALARMBarometer SnoozeView Barometer Area BAR Chart DisplaySelect Measurement Unit View Barometer HistoryWeather Forecast Icons Weather ForecastMaximum / Minimum Memory for UVI NEW Additional UV FeaturesUV Exposure Time Countdown View Temperature and Humidity Area Temperature and HumiditySelect Sensor Channel Minimum / Maximum RecordsHeat Index Temperature and Humidity TrendComfort Zone Backlight Reset SystemSafety and Care Problem Symptom Remedy TroubleshootingSpecifications Power Main Unit FCC Statement About Oregon ScientificBAR988HGA / BAR986HGA Declaration of ConformityOregon Scientific. All rights reserved