Oregon Scientific BAR986HGA, BAR988HGA Alarms, SET Clock, Switch Clock Display, SET Daily Alarm

Atomic clock disabled:

SET CLOCK

The BAR988HGA / BAR986HGA and the RTGR368NA should automatically set and update the time, as necessary. However, if you are too far away from an Atomic Clock broadcast signal, or the product is unable to synchronize with the broadcast due to interference, you may need to set the clock manually.

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press and hold MODE for 2 seconds.

3.Select the time zone offset hour (+ / -23 hours), 12 / 24 hour format, hour, minute, year, date / month format, month, date and display language.

4.Press UP or DOWN to change the setting.

5.Press MODE to confirm.

NOTE If no time zone hour offset is set, the time shown will be Pacific Time. To change to another US time zone, select an hour offset accordingly. The time zone options and their related hour offset times are Pacific (-8), Mountain (-7), Central (-6) and Eastern (-5).

15

NOTE The language options are (E) English,

(F)French, (D) German, (I) Italian, and (S) Spanish. The language you select determines the weekday display.

SWITCH CLOCK DISPLAY

Press SELECT to navigate to the Clock Area. will show next to the Area.

Press MODE to toggle between:

•Clock with seconds

•Clock with day

•Clock with time-zone offset

•Calendar

ALARMS

This product has 2 alarms: The Daily Alarm and a Pre-Alarm for snowy weather. The Daily Alarm can be set to go off at the same time every day. The Pre-Alarm sounds only when the Daily Alarm is activated and the recorded temperature from Channel 1 Sensor falls to 35.6°F (2°C) or below.

SET DAILY ALARM

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

EN

BAR988HGA English R5 15 9/18/04, 3:00 AM