EN
The RTGR328NA Sensor collects and transmits temperature and humidity information, along with time and date information. Time and date information is obtained by synchronizing with radio broadcasted atomic clock information from the National Institute of Time located in Boulder Colorado. For more information on the Atomic Clock, please visit www.nist.gov
SET UP THERMO / HYGRO SENSOR (RTGR328N)
1.Open the battery compartment with a small Phillips screwdriver.
2.Insert the batteries.
3.Set the channel and radio signal format. The switches are located in the battery compartment.
SWITCH | OPTION |
Channel | If you are using more than one |
| sensor, select a different channel |
| for each sensor. |
|
|
4. Press RESET. Then set the temperature unit.
SWITCH | OPTION |
Temp | °C / °F |
5.Press ZONE to select the US time zone (P for Pacific, M for Mountain, C for Central or E for Eastern).
6.Close the battery compartment.
12
To fold out the stand:
1 |
2 |
For best results:
•Insert the batteries and select the unit, channel, and US time zone before you mount the sensor.
•Place the sensor out of direct sunlight and moisture.
•Do not place the sensor more than 230 feet (70 meters) from the main (indoor) unit.
•Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture.
•Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects.
•Position the sensor close to the main unit during cold winter months as
BAR988HGA English R5 | 12 | 9/18/04, 3:00 AM |