Robic SC-848W-300 warranty Max Slow Average and Memory Recall, Max Slow Average Lap Speed & Time

Page 11

lap running time will appear in Row 3. Continue to press “B” for each lap reading as needed. Your SC-848W will take up to 1000 lap speed readings.

STOP/END OF EVENT: At the end of the event, press “A”, STOP indicator appears. The speed and time of the last lap will appear in the display (lap number and time in the top row and speed in the middle row) and the lower row will show the last recorded lap time.

RESET: After you have completed timing and reviewing all information, press “B” for two seconds to reset the Speed Timer to all zeros.

ADVANCED FUNCTIONS: Your SC-848W speed timer is equipped with the advanced functions described below. You may use all the Advanced Functions during or after your timing of the event. Please review them carefully.

ADVANCED FUNCTIONS CANNOT BE USED IF YOU HAVE RESET THE DISPLAY TO ALL ZEROS.

Max - Slow - Average and Memory Recall

Your SC-848W has a 300 lap memory through 999 laps, as well as Fastest, Slowest and Average Lap Speed and Time display. To use these functions, press “F” anytime while in the Speed Timer Mode. The MAX indicator will appear above the top row.

Max - Slow - Average Lap Speed & Time

The MAX indicator means the Fastest Lap Time is shown in the top row and the associated Maximum speed of all readings taken is displayed in the middle row. The Fastest lap number is displayed in the LAP counter.

Press “F” again to display the SLOWEST Lap Speed, Time and Number. The SLOW indicator will appear.

Press “F” again, to display the Average Lap Speed and Time of all readings. The AVG indicator will appear. The Lap Counter will show the total amount of readings taken.

300 Memory Recall

After sequencing through the Fastest, Slowest and Average Lap information, press or hold “F” to review up to the previous 300 readings in speed, time and lap number up through 999 laps. The SC-848W will review in descending order (999, 998, 997, etc. . .).

The lap speed will appear in the middle row and the lap number and time will appear in the top row.

During Memory Recall use, you may press “E” at any time, to return to the current or previously taken readings.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Robic SC-848W Operating Instructions Part Pushbutton and Indicator Location and OperationRecall Memory Mode SequenceEL Backlight Operation Speed Timer-Press EChronograph Stopwatch-Press E Part 2 Normal Time Operation Audible Beep CONFIRMATION-HOURLY ChimePart 4 Countdown Timers Operation Part 3 Alarm Time OperationTimertr Timing Single Lap Events Part 5- Chronograph Stopwatch OperationSelect Lap or Split in Row Select Recall Up or DownAdvanced Functions Timing Multiple Lap/Split EventsEnter Distance How to Determine and Enter the DistanceMultiple Lap Event Timing One Lap Event START/STOP/RESETImportant NOTICE--- Error Indicator ResetMemory Recall Max Slow Average and Memory RecallMax Slow Average Lap Speed & Time Part 7 Stroke Rate Calculator
Top Page Image Contents