Rhino Mounts 2408 manual Pre-Operation Inspection and Service

Page 57
(SL-36)
(SG-21)

OPERATION

6. Pre-Operation Inspection and Service

Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death.

Before each use, a pre-operation inspection and service of the implement and tractor must be performed. This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time and repair cost can be avoided. OPS-L-0026

2408 01/11

Operation Section 4-11

© 2011 Alamo Group Inc.

OPERATION

Page 56 Page 58
Image 57
Page 56 Page 58
Contents 2408 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety2408 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 2408 01/11 Safety Section Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices 2408 01/11 Safety Section See Your Rhino Dealer Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Loader Positions 2408 01/11 Safety Section Loader Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Dismounting Loader and Mounting Loader to Tractor AssemblyAssembly Proper Ballasting and Wheel Spacing Dismounting Loader Mounting Loader Attaching Pin on BucketAssembling Quick Attach Device Installing Quick Attach Device When Connecting an Attachment to the Loader Quick Hitch Assembly Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the TractorDismounting the Tractor Boarding the TractorStarting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Filling the Bucket Operating the LoaderOperation Lifting the Load Carrying the Load Lowering the Bucket Dumping the BucketOperating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideProblem Possible Cause Remedy Maintenance Section Maintenance 2408 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Lift and Bucket Cylinder Disassembly Cylinder ServiceLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER SOM-01/11 F-3971C Printed U.S.A

2408 specifications

Rhino Mounts 2408 is a cutting-edge mounting solution designed for a variety of applications, catering to the ever-evolving needs of professionals and enthusiasts alike. This innovative product is built to support a range of equipment securely and efficiently, providing stability and versatility in different environments.

One of the main features of the Rhino Mounts 2408 is its robust construction. Made from high-quality aluminum, this mount is both lightweight and exceptionally durable, ensuring it can withstand the rigors of daily use without compromising performance. The corrosion-resistant finish further enhances its longevity, making it suitable for outdoor applications where environmental factors could otherwise lead to wear and tear.

The 2408 model offers impressive adjustability, allowing users to easily customize the mount to their specific needs. With a variety of tilt and rotation options, it can accommodate different viewing angles, ensuring optimal visibility and accessibility. This flexibility is particularly useful in professional settings, where precise alignment can make a significant difference in functionality and efficiency.

Rhino Mounts 2408 features advanced locking mechanisms, ensuring that equipment remains securely in place during operation. These mechanisms are designed to be user-friendly, allowing for quick adjustments without the need for specialized tools. This ease of use makes the mount suitable for a wide range of users, from seasoned professionals to those new to the field.

The mount’s compatibility is another highlight, designed to work seamlessly with a variety of devices and brands. Whether mounting cameras, monitors, or other equipment, the Rhino Mounts 2408 provides a reliable solution that ensures stability and performance. Its universal design and adaptability to various attachments make it an ideal choice for diverse applications.

Additionally, the mount incorporates innovative vibration-dampening technology that enhances stability and minimizes disruptions during operation. This feature is especially beneficial in high-frequency environments, where vibrations can impact the performance of the mounted equipment. By absorbing and reducing vibrations, the 2408 model enhances the overall user experience.

In summary, Rhino Mounts 2408 stands out as a versatile, durable, and adaptable mounting solution. With its robust construction, flexible adjustability, secure locking mechanisms, broad compatibility, and advanced vibration-dampening technology, it offers users a reliable option for mounting needs across various applications. Whether in a studio, on a job site, or in a dynamic field environment, the 2408 model ensures that equipment is securely held and easily accessible, enabling maximum efficiency and effectiveness.
Top Page Image Contents