Rhino Mounts 2408 manual Operation

Page 69
(SL-21)
(SL-32)
(SL-31)
(SL-22)
(SL-38)
(SPU-3)

OPERATION

Never leave the Implement and Power Unit unattended while the Implement is in the raised position. Accidental operation of a lifting lever or a hydraulic failure may cause the implement to suddenly fall causing serious injury or possible death to anyone who might inadvertently be under the Implement. Lower the implement carefully to the ground. Do not put hands or feet under lifted components.

Before dismounting the tractor and loader, lower the loader to the ground or onto solid support blocks. Sudden dropping of the loader and attachment could result in serious injury.

Make sure the hydraulic quick disconnects are fully seated into the connections. Do not use the loader if the hydraulic connection is leaking. Leaking oil could allow the loader to fall resulting in a serious crushing injury.

If the loader valve controls fail to functions properly discontinue use of the tractor and loader until the controls are properly repaired. Sudden or unexpected movement or dropping of the loader and attachment could result in serious injury.

Make sure all air is purged from the hydraulic system before using the loader. Air in the system can cause the loader to respond sluggishly or with unexpected movement. The air can be purged from the cylinder lines by fully cycling the cylinders several times from the fully closed to fully open position. Sudden or unexpected movement or dropping of the loader and attachment could result in serious injury.

Do not raise the loader on a hillside. Do not transport across a slope with a raised loader. When the loader is raised, the center of gravity of the tractor and loader is raised increasing the potential for the tractor to tip over. Tractor wheel contact with any wash out, drop off or the ground obstruction with a raised loader could result in the tractor tipping over and causing serious bodily injury.

Always have a heavy attachment, such as a bucket mounted on loader when it is removed from tractor.

It is important not to put excessive weight on parking stands with lift cylinder retraction. Damage may result.

2408 01/11

Operation Section 4-23

© 2011 Alamo Group Inc.

OPERATION

Page 68 Page 70
Image 69
Page 68 Page 70
Contents 2408 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety2408 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 2408 01/11 Safety Section Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices 2408 01/11 Safety Section See Your Rhino Dealer Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Loader Positions 2408 01/11 Safety Section Loader Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Dismounting Loader and Mounting Loader to Tractor AssemblyAssembly Proper Ballasting and Wheel Spacing Dismounting Loader Mounting Loader Attaching Pin on BucketAssembling Quick Attach Device Installing Quick Attach Device When Connecting an Attachment to the Loader Quick Hitch Assembly Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the TractorDismounting the Tractor Boarding the TractorStarting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Filling the Bucket Operating the LoaderOperation Lifting the Load Carrying the Load Lowering the Bucket Dumping the BucketOperating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideProblem Possible Cause Remedy Maintenance Section Maintenance 2408 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Lift and Bucket Cylinder Disassembly Cylinder ServiceLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER SOM-01/11 F-3971C Printed U.S.A

2408 specifications

Rhino Mounts 2408 is a cutting-edge mounting solution designed for a variety of applications, catering to the ever-evolving needs of professionals and enthusiasts alike. This innovative product is built to support a range of equipment securely and efficiently, providing stability and versatility in different environments.

One of the main features of the Rhino Mounts 2408 is its robust construction. Made from high-quality aluminum, this mount is both lightweight and exceptionally durable, ensuring it can withstand the rigors of daily use without compromising performance. The corrosion-resistant finish further enhances its longevity, making it suitable for outdoor applications where environmental factors could otherwise lead to wear and tear.

The 2408 model offers impressive adjustability, allowing users to easily customize the mount to their specific needs. With a variety of tilt and rotation options, it can accommodate different viewing angles, ensuring optimal visibility and accessibility. This flexibility is particularly useful in professional settings, where precise alignment can make a significant difference in functionality and efficiency.

Rhino Mounts 2408 features advanced locking mechanisms, ensuring that equipment remains securely in place during operation. These mechanisms are designed to be user-friendly, allowing for quick adjustments without the need for specialized tools. This ease of use makes the mount suitable for a wide range of users, from seasoned professionals to those new to the field.

The mount’s compatibility is another highlight, designed to work seamlessly with a variety of devices and brands. Whether mounting cameras, monitors, or other equipment, the Rhino Mounts 2408 provides a reliable solution that ensures stability and performance. Its universal design and adaptability to various attachments make it an ideal choice for diverse applications.

Additionally, the mount incorporates innovative vibration-dampening technology that enhances stability and minimizes disruptions during operation. This feature is especially beneficial in high-frequency environments, where vibrations can impact the performance of the mounted equipment. By absorbing and reducing vibrations, the 2408 model enhances the overall user experience.

In summary, Rhino Mounts 2408 stands out as a versatile, durable, and adaptable mounting solution. With its robust construction, flexible adjustability, secure locking mechanisms, broad compatibility, and advanced vibration-dampening technology, it offers users a reliable option for mounting needs across various applications. Whether in a studio, on a job site, or in a dynamic field environment, the 2408 model ensures that equipment is securely held and easily accessible, enabling maximum efficiency and effectiveness.
Top Page Image Contents