RIDGID RD80763 manual Service, Symbol Signal Meaning

Page 6

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

 

 

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will

 

result in death or serious injury.

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could

 

result in death or serious injury.

 

 

 

 

 

 

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result

 

in minor or moderate injury.

 

 

 

 

 

 

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in prop-

 

erty damage.

 

 

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. Save this operator’s manual and review frequently for continuing safe operation and instructing others who may use this product. Call RIDGID® customer service for assistance.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual RD80763/RD80964Table of Contents IntroductionImportant Safety Instructions Read ALL InstructionsSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningMax. rating determined by Pwma Standard FeaturesProduct Specifications RecoilAssembly Axle Attaching the rear panelHandle Torx Screw Rear panel Washer wheel hitch pinAttaching the trigger handle rest Attaching the wheel assemblySupport Foot Raising and Lowering the handleAttaching the auxiliary handle Connecting high pressure hose toAssembling the trigger handle Trigger HandleFunnel Adding oil to the engineAdding gasoline to the Fuel tank OIL CAP /  Dipstick FunnelOperation Connecting the garden hose to the pressure washerConnecting the high pressure hose to the pump To connect the garden hose to the machineStarting and stopping the pressure washer Engine SwitchApplications See Figures 14Operation Using the spray wand triggerUsing the Nozzles SeeWashing with detergent See Figures 20Rinsing with the pressure washer Moving the pressure washerCleaning the air filter MaintenanceGeneral Maintenance AIR Filter CoverNozzle maintenance Changing the OILChecking a fouled spark plug Pump maintenance Storing the pressure washerPreparing for use after storage Troubleshooting Problem Cause SolutionPage Warranty Federal Emissions Component Defect WarrantyGeneral Emissions Warranty Coverage High Altitude Engine Operation Warranty Periods Limited 3 Year Engine Warranty for Ridgid Pressure WasherLimited Manufacturer’s Warranty from Subaru Robin Rely on Subaru Robin ReliabilityWhat is not Covered Ridgid Pressure Washer 3 Year Limited WarrantyWhat is Covered Under the 3 Year Limited Warranty HOW to Obtain ServiceCustomer Service Information RD80763 / RD80964Model No RD80763 / RD80964 Serial No
Top Page Image Contents