Scag Power Equipment GC-STT Introduction, Direction Reference, Safety and Operating Instructions

Page 3

1.1 INTRODUCTION

This manual has been prepared to provide the information you need to correctly assemble, operate, and maintain this grass catcher. Read it carefully and keep it for future reference.

The replacement of any part on this product by other than the manufacturer's authorized replacement part may adversely affect the performance, durability or safety of this product.

USE OF OTHER THAN ORIGINAL SCAG REPLACEMENT PARTS WILL VOID THE WARRANTY.

If additional information or service is needed that is not outlined in this manual, please contact your Scag Power Equipment dealer. Scag dealers are trained in the latest service methods and carry a full line of Scag replacement parts.

When ordering parts, always provide the complete model and serial number of your catcher.

All information provided in this manual is based upon information available at the time of printing. Scag Power Equipment reserves the right to make changes at any time without notice or obligation.

1.2 DIRECTION REFERENCE

The "Right" and "Left", "Front" and "Rear" of the machine are referenced from the normal operating position.

2.1SAFETY AND OPERATING INSTRUCTIONS

-NOTE-

To avoid personal injury, it is imperative that all safety instructions be observed.

1.Read this operator's manual and the operator's manual that is supplied with the machine this attachment is used on.

A replacement manual is available from your authorized Scag Service Dealer or by contacting: Scag Power Equipment, Service Department at P.O. Box 152, Mayville, WI 53050. You may also contact us through our website at www.scag.com. Please indicate the complete model and serial number of your Scag product when ordering a replacement manual.

2.Before removing the grass bags, disengage the mower, stop the engine and wait for all movement to stop.

3.ALWAYS turn the engine OFF, remove the key and wait for all movement to stop before servicing or cleaning the mower or the grass catcher.

4.Do not modify or alter any component of the grass catcher attachment or mower.

5.Do not allow any passengers to ride on the grass catcher attachment or on the mower.

1

Image 3
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Safety and Operating Instructions IntroductionDirection Reference Assembly Instructions for 52 Cutter Decks Right Side Cutter Deck Shown Back Side Idler Pulley Blower Front Side Spindle Operate and test Assembly Instructions for 61 Cutter Decks Rear Cutter Deck Discharge Chute Opening Back Side Idler Pulley Blower Pulley Front Side Spindle Weight Assembly Instructions for 72 Cutter DecksBack Side Idler Pulley Blower Right Side Cutter Deck Shown Catcher Support Bracket Liquid Cooled Only Clevis PIN Grass Catcher Removal InstructionsPage 16 15 GC-STT Blower Housing Assembly GC-STT Blower Mounting Components Part Number Description GC-STT Bucket Support Components Some of the hardware is common hardware GC-STT BAG Support Bracket and Seal 423198 GC-STT Decals Page Limited WARRANTY- Commercial Accessory Scag Power Equipment