Scag Power Equipment STT61V-29DFI-LE, STT-29DFI, STT61V-35BVAC, STT-35BVAC Charging the Battery

Page 43

Section 7

R

- NOTE -

In extremely dusty conditions it may be necessary to check the element once or twice daily to prevent engine damage.

1.Unhook the clamps securing the air cleaner cover to the air filter canister. Remove the air cleaner cover and set aside.

2.Remove the air cleaner and inspect.

3.Clean or replace the air cleaner and foam pre-cleaner as recommended by the engine manufacturer.

4.Replace the air cleaner cover and be sure to snap the latches closed.

7.7 Battery

WARNING

Lead-acid batteries produce flammable and explosive gases. To avoid personal injury when checking, testing or charging batteries, DO NOT use smoking materials near batteries. Keep arcs, sparks and flames away from batteries. Provide proper ventilation and wear safety glasses.

WARNING

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to cause cancer and reproductive harm. Wash hands after handling.

WARNING

Electric storage battery fluid contains sulfuric acid which is POISON and can cause SEVERE CHEMICAL BURNS. Avoid contact of fluid with eyes, skin, or clothing. Use proper protective gear when handling batteries. DO NOT tip any battery beyond 45° angle in any direction. If fluid contact does occur, follow first aid suggestions below.

BATTERY ELECTROLYTE FIRST AID

External Contact — Flush with water.

Eyes — Flush with water for at least 15 minutes and get medical attention immediately.

Internal — Drink large quantities of water. Follow with Milk Of Magnesia, beaten egg, or vegetable oil. Get medical attention immediately. In case of internal contact, DO NOT give fluids that would induce vomiting.

A. Charging the Battery

Refer to the battery charger’s manual for specific instructions.

Under normal conditions the engine’s alternator will have no problem keeping a charge on the battery. If the battery has been completely discharged for a long period of time, the alternator may not be able to recharge the battery, and a battery charger will be required.

DO NOT charge a frozen battery. It may explode and cause injury. Let the battery warm before attaching a charger.

Whenever possible, remove the battery from the mower before charging and make sure the electrolyte covers the plates in all cells.

37

Page 42 Page 44
Image 43
Page 42 Page 44
Contents OPERATOR’S Manual STT-35BVAC Remember Your Mower is only AS Safe AS the OperatorTable of Contents Troubleshooting Cutting Conditions Adjustments Limited Warranty Commercial Equipment Table of Contents Direction Reference IntroductionServicing The Engine And Drive Train Components Symbol Description SymbolsSafety Information Operation Considerations Section ROLL-OVER Protection System Seat Belt Inspection Spark Ignition System Forward Reverse Electrical EngineCutter Deck Power Head72VS Weights And Dimensions 52V 61VHydraulic System Productivity 52V 61VControls And Instrument Identification Operating InstructionsDump Valve Control Safety Interlock SystemForward Travel Initial Run-In ProceduresStarting The Engine Ground Travel And SteeringReverse Travel Engaging The Deck Drive Cutter BladesParking The Mower Rotating BladesHillside Operation After OperationMoving Mower With Engine Stopped Adjusting Cutting HeightRecommendations For Mowing Adjusting The Height Adjust Pedal Adjusting The Steering LeversTowing Optional Hitch Accessory Condition Cause Cure Troubleshooting Cutting ConditionsCut, or Rough Contour Troubleshooting Cutting Conditions ContdScalping Blades Hitting Parking Brake Adjustment AdjustmentsNeutral Adjustment Travel AdjustmentsBelt Adjustment Throttle Control And Choke AdjustmentsTracking Adjustment Cutter Deck Pitch Cutter Deck AdjustmentsBelt Alignment Cutter Deck LevelCutter Deck Height Custom-Cut Baffle AdjustmentPosition Custom-Cut Baffle Adjustment 10. Clutch Air Gap Adjustment Electric clutch adjustmentMaintenance Chart Recommended Service Intervals MaintenanceLubrication Maintenance Chart Recommended Service Intervals ContdLubrication Fitting Points Changing Hydraulic Oil Checking Hydraulic Oil LevelEngine Fuel System Engine OilCleaning and/or Replacing Air Cleaner Element Engine Air CleanerReplacing In-Line Fuel Filter Elements Charging the Battery BatteryBlade Inspection Drive BeltsCutter Blades Jump StartingTires Blade ReplacementCooling System Cutter Deck GearboxBody, Deck, And Upholstery Cleaning the Radiator Debris ScreenChecking The Fan Belt Tension Liquid- Cooled Engines Only Section Scag Approved Attachments And Accessories Illustrated Parts ListSection Description 52V Cutter Deck61V & 72VS Cutter Decks Description Cutter Deck Controls Cutter Deck Controls Sheet Metal Components 9278 STT ROLL-OVER Protection System STT ROLL-OVER Protection System STT Suspension Seat Section Deck Drive Components 35BVAC Engine and Attaching Parts Kohler Available through the individual engine manufacturer Engine & Attaching Parts 27HP, 29DFI Kawasaki & 35BVAC Engine & Attaching Parts 27HP, 29DFI Kawasaki & 35BVAC Brake and Steering Components Bolt, Carriage 5/16-18 x STT Hydraulic System Base Fuel Models produced prior to 1/1/2011 STT Fuel System EPA PhaseSTT Fuel System EPA Phase 3 models produced after 1/1/2011 STT Fuel System EPA Phase STT FS Carb Teir 3 Rev2.eps STT-LE Fuel System C.A.R.B. Tier BDP-16A Hydraulic Pump Assembly BDP-16A Hydraulic Pump Assembly Port a Side Hex Screw, Flanged Head M10 x 1.50-65mm Section Electrical System Kohler & Briggs & Stratton Instrument Panel, Top w/Decals Electrical System 27HP Kawasaki Electrical System 27HP Kawasaki Electrical System 29DFI Kawasaki Electrical System 29DFI Kawasaki Heavy-Duty Replacement Decals and Information Plates1617 STT Electrical Schematic Kohler Engine STT Electrical Schematic 27HP KawasakiRelay Electrical Schematic 29DFI KawasakiSection STT Electrical Schematic 35BVAC Briggs & Stratton Limited Warranty Commercial Equipment

STT-35BVAC, STT61V-29DFI-LE, STT61V-35BVAC, STT61V-29DFI, STT-29DFI specifications

Scag Power Equipment is renowned for its high-quality lawn care machinery, and among its range of products, the STT series stands out, particularly the STT-29DFI, STT61V-35BVAC, STT61V-29DFI, STT61V-29DFI-LE, and STT-35BVAC models. These zero-turn mowers are designed to deliver exceptional performance, durability, and efficiency, catering to both commercial landscapers and homeowners alike.

The STT-29DFI offers an impressive 29 horsepower, powered by a state-of-the-art EFI engine. This model boasts an advanced deck design, featuring a robust 61-inch cutting width that ensures a clean and even cut. The mower's zero-turn capability allows for enhanced maneuverability, making it easier to navigate around obstacles and achieve a professional finish.

In comparison, the STT61V-35BVAC takes power to the next level with a 35 horsepower engine. This model is perfect for tackling larger areas and more challenging terrains. The vacuum-assisted cutting system effectively collects clippings, reducing cleanup time after mowing. The heavy-duty, reinforced steel frame ensures long-lasting durability, while the comfortable operator seat and control system enhance user experience.

The STT61V-29DFI is another remarkable addition to this lineup, featuring a 29 horsepower engine equipped with EFI technology. This model focuses on fuel efficiency, allowing operators to maximize output while minimizing fuel consumption. With its 61-inch cutting deck, it provides an excellent balance between power and precision, ideal for both commercial and residential use.

For those looking for a more specialized option, the STT61V-29DFI-LE includes enhancements aimed at professional landscapers, such as a premium seat suspension system for extended comfort during long operating hours. This model also features a customizable control panel, making it easier for operators to tailor settings to their specific needs.

Lastly, the STT-35BVAC integrates a robust 35 horsepower engine, along with advanced features that promote efficiency and productivity. This model's design prioritizes user-friendly operation, with intuitive controls and easy access to maintenance points. The vacuum system further enhances its capabilities by collecting grass clippings and debris as you mow, ensuring a tidy lawn at all times.

In summary, Scag Power Equipment's STT series is characterized by powerful engine options, advanced cutting technologies, and a commitment to durability and operator comfort. Whether you choose the STT-29DFI, STT61V-35BVAC, STT61V-29DFI, STT61V-29DFI-LE, or STT-35BVAC, you can expect a mower that stands up to the demands of any lawn care task.
Top Page Image Contents