Scag Power Equipment STT-28CAT Adjusting the Height Adjust Pedal, Adjusting the Steering Levers

R

Section 4

DECK RELEASE

LEVER

				.	HEIGHTCUTTING
				5	6
			4	5 5
		3	.
			4 5
	2	.
		3 5
1	.
	2 5
.
1 5
481543

390S0151-1

Figure 4-6. Deck Release Lever

4.14Adjusting the Height Adjust Pedal

1.Position the seat to the desired location.

2.While in the operator's position without the engine running, push down on the height adjust pedal to check for full function control.

3.The height adjust pedal can be located in three (3) different positions for operator comfort and control. See Figure 4-7.

4.15 Adjusting the Steering Levers

1.Position the seat to the desired location.

2.While in the operator's position with out the engine running, move both steering levers forward and reverse to check for full function control and comfort.

3.If adjustment of the steering levers is needed, use the following instructions to adjust.

A.Loosen the tension knob on the lever assembly.

B.Rotate the steering lever forward or backward to achieve the optimum operating position.

C.Tighten the tension knob and repeat on the opposite side.

D.While in the operator's position, bring the steering levers out of the neutral lock position and check to make sure both levers are even before operating.

TENSION kNOB

ROTATE

LEvER

TENSION kNOB

CUTTINGHEIGHT6

1 25.1 35.2 45.3 55.4 5.5

Figure 4-8. Adjusting Steering Levers

390S0140-2

HEIGHT ADJUSTMENT PEDAL LOCATIONS

Figure 4-7. Height Adjust Pedal Locations

18