Scag Power Equipment STT-28CAT manual Maintenance Chart Recommended Service Intervals

Section 7 R

MAINTENANCE

7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS

		HOURS
						Procedure	Comments
Break-In	8	40	100	200	500
(First 10)
X						C h e ck a l l h a r d wa r e fo r
						tightness
X						Check hydraulic oil level	See paragraph 7.3
X						Check all belts for proper	See paragraph 7.8
						alignment
X						Change engine oil and filter	See paragraph 7.4
						Check hydraulic hoses for	Use extreme caution when
X						leaks	checking the hydraulic hoses.
							See paragraph 2.6
X						Check coolant level	See paragraph 7.12
	X					Check engine oil level	See paragraph 7.4
	X					*Clean mower	See paragraph 7.13
	X					Check condition of blades	See paragraph 7.9
	X					Apply grease to fittings	See paragraph 7.2
	X					Check tire pressure	See paragraph 7.10
	X					Check coolant level	See paragraph 7.12
	X					Inspect seat belt for wear or	See paragraph 2.5
						damage
	X					Check the operator interlock	See paragraph 4.2
						system
		X				Check battery electrolyte level	See paragraph 7.7
						clean battery posts and cables
		X				C h e ck b e l t s fo r p r o p e r	See paragraph 7.8
						alignment
			X			Apply grease to fittings	See paragraph 7.2
			X			Change engine oil	See paragraph 7.4
			X			*Clean air cleaner element	See paragraph 7.6
			X			Check lubricant in cutter deck	See paragraph 7.11
						gearbox

* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions

29