Scag Power Equipment STT manual Tracking Adjustment, Throttle Control and Choke Adjustments

Page 23

Section 6

Tracking Adjustment

CAUTION:

Stop the engine and remove the key from the ignition before making any adjustments. Wait for all moving parts to come to a complete stop before beginning work.

CAUTION:

The engine and drive unit can get hot during operation causing burn injuries. Allow engine and drive components to cool before making any adjustments.

-NOTE-

Before proceeding with this adjustment, be sure that the caster wheels turn freely and that the tire pressure in the drive wheels is correct. If the tire pressure is not correct, the machine will pull to the side with the lower pressure.

1.If at full speed the mower pulls right, it is an indication that the left wheel is turning faster than the right wheel. To adjust this condition, proceed as follows:

A.Stop the machine and place the steering control levers in the neutral position. Loosen the lock nuts securing the ball joints at each end of the LH steering control rod. Rotate the control rod to lengthen the rod and tighten the lock nuts. This will cause the control rod to stroke the LH pump less, slowing down the LH wheel. (See Figure 6-4)

-NOTE-

If after making the adjustment as outlined in step 1A, the machine creeps forward or backward, the neutral adjustment must be made as described on page 19.

2.If at full speed the mower pulls left, it is an indication that the right wheel is turning faster than the left wheel. To adjust this condition, proceed as follows:

A.Stop the machine and place the steering control levers in the neutral position. Loosen the lock nuts securing the ball joints at each end of the RH steering control rod. Rotate the control rod to lengthen the rod and tighten the lock nuts. This will cause the control rod to stroke the RH pump less, slowing down the RH wheel. (See Figure 6-3)

-NOTE-

If after making the adjustment as outlined in step 2A, the machine creeps forward or backward, the neutral adjustment must be made as described on page 19.

6.3THROTTLE CONTROL AND CHOKE ADJUSTMENTS

These adjustments must be performed by your Scag dealer to ensure proper and efficient running of the engine. Should either need adjustment, contact your authorized Scag service center.

6.4 BELT ADJUSTMENT

WARNING:

Before removing any guards, shut the engine off and remove the ignition key.

All drive belts and cutter deck belts are spring loaded and self-tensioning. The belts should be checked periodically for proper alignment and wear.

6.5 BELT ALIGNMENT

Belt alignment is important for proper performance of your Scag mower. If you experience frequent belt wear or breakage, see your authorized Scag service center for belt adjustment.

20

Page 22 Page 24
Image 23
Page 22 Page 24
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Servicing the Engine and Drive Train Components IntroductionDirection Reference Before Operation Considerations Signal WordsOperation Considerations Before Operation Considerations ContdOperation Considerations Contd Maintenance ConsiderationsRotating Blades and Belts Safety and Instructional Decals Spinning BladeStart / Drive Procedure Tractor EngineElectrical Hydraulic System Weights and Dimensions ModelTractor Contd Cutter DeckSection Controls and Instrument Identification Operating InstructionsSafety Interlock System Forward Travel Ground Travel and SteeringStarting the Engine Engaging the Deck Drive Cutter Blades Reverse TravelAfter Operation Hillside OperationParking the Mower Recommendations for Mowing Rotating BladesRemoving Clogged Material Moving Mower with Engine StoppedDeck Release Lever Adjusting Cutting HeightCondition Cause Cure Troubleshooting Cutting ConditionsScalloped Cut, or Rough Contour Troubleshooting Contd Condition Cause CureGround Troubleshooting ContdTravel Adjustments Parking Brake AdjustmentRH Steering Control Rod Adjustment Neutral AdjustmentBelt Alignment Tracking AdjustmentThrottle Control and Choke Adjustments Belt AdjustmentCutter Deck Pitch Cutter Deck AdjustmentsCutter Deck Level Cutter Deck Height Cutter Deck Height AdjustmentMaintenance Chart Recommended Service Intervals MaintenanceLubrication Grease Fitting Lubrication Chart see Figure Maintenance Chart Recommended Service Intervals ContdLubrication Fitting Points Changing Hydraulic Oil Checking Hydraulic Oil LevelChanging Engine Crankcase Oil Changing Hydraulic Oil Filter ElementEngine OIL Checking Engine Crankcase Oil LevelEngine Fuel System Engine AIR CleanerCharging the Battery BatteryChecking Electrolyte Level and Cleaning Battery Cutter Blades Jump StartingDrive Belts Blade SharpeningTires Blade ReplacementChecking Coolant Level Cutter Deck GearboxChecking Lubricant Level Kawasaki Cooling SystemBODY, DECK, and Upholstery Cleaning the Radiator Debris ScreenChecking The Fan Belt Tension Section 52 & 61 Cutter Decks Ref. Part Description 52& 61 Cutter DecksCutter Deck CONTROLS, 52 & 61 Decks Part Description Cutter Deck CONTROLS, 52 & 61 DecksSheet Metal Components Sheet Metal Components Deck Drive Components Deck Drive Components Engine and Attaching Parts Kohler Engine and Attaching Parts Kohler Engine and Attaching Parts Kawasaki Engine and Attaching Parts Kawasaki Brake and Steering Components Brake and Steering Components Fuel and Hydraulic System Fuel and Hydraulic System Electrical System Kohler Electrical System Kohler Electrical System Kawasaki Electrical System Kawasaki Hydraulic Pump Assembly Housing Kit Includes Housing, Journal Bearing Operating Machine Replacement Decals and Information Plates2018 Electrical Schematic Kohler Electrical Schematic Kawasaki Limited WARRANTY-COMMERCIAL Equipment 1998

STT specifications

Scag Power Equipment is renowned for producing high-quality outdoor power equipment, and among its impressive lineup is the Scag STT series of zero-turn mowers. These machines are designed for professionals who require efficient, durable, and powerful mowing performance. The STT offers several features that set it apart from the competition, making it a fantastic choice for landscaping and lawn care businesses.

One of the standout features of the Scag STT is its powerful engine options. The mower is available with various engine choices, including the reliable Kawasaki and Kohler engines, which provide ample power to tackle even the toughest mowing tasks. With horsepower ratings reaching up to 25 HP, the STT ensures that operators can efficiently handle large properties and dense grass without any strain.

The STT's innovative design includes a robust steel frame and deck that provide exceptional durability and longevity. The mower's heavy-duty construction ensures it can withstand the rigors of daily professional use. The commercial-grade cutting deck is available in sizes ranging from 48 to 61 inches, allowing for versatility based on the user's specific needs. This deck features Scag's patented design, which enhances airflow for superior cutting performance and an immaculate finish.

Another key characteristic of the STT is its patented Velociti Drive System. This technology allows for faster ground speeds while maintaining optimum control, ensuring that operators can cover large areas quickly without sacrificing mowing quality. Additionally, the STT is equipped with a hydrostatic drive system that provides smooth acceleration and efficient operation, making it easy to navigate around obstacles and tight spaces.

Operators will also appreciate the comfort features incorporated into the STT design. The mower comes with a premium high-back seat, complete with adjustable armrests, which contributes to reduced fatigue during long mowing sessions. The ergonomic control layout, including easy-to-use controls and a spacious operator platform, enhances comfort and usability, making it ideal for professionals who spend hours mowing.

Maintenance is straightforward with the Scag STT, thanks to features like easy-access maintenance components and a simplified grease system. This design minimizes downtime and allows for quick servicing, enabling operators to spend more time on the job.

In summary, the Scag Power Equipment STT combines robust engineering, powerful engine options, and innovative technologies to deliver outstanding mowing performance. Its durability, comfort features, and ease of maintenance make it an excellent choice for landscape professionals looking for a reliable and efficient zero-turn mower for their business.
Top Page Image Contents