Scag Power Equipment STT manual Signal Words, Before Operation Considerations

Page 4

Section 2

SAFETY INFORMATION

2.1 INTRODUCTION

Your mower is only as safe as the operator. Carelessness or operator error may result in serious bodily injury or death. Hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance and storage of the equipment. Make sure every operator is properly trained and thoroughly familiar with all of the controls before operating the mower.

READ THIS OPERATOR’S MANUAL BEFORE ATTEMPTING TO START YOUR MOWER.

A replacement manual is available from your authorized Scag Service Dealer or by contacting Scag Power Equipment, Service Department at P.O. Box 152, Mayville, WI 53050. Please indicate the complete model and serial number of your Scag product when requesting replacement manuals.

2.2 SIGNAL WORDS

This symbol means “Attention! Become Alert! Your

Safety is Involved!" The symbol is used with the following signal words to attract your attention to safety messages found on the decals on the machine and throughout this manual. The message that follows the symbol contains important information about safety. To avoid injury and possible death, carefully read the message! Be sure to fully understand the causes of possible injury or death.

Signal Word:

The signal word “DANGER” denotes that an extremely hazardous situation exists on or near the machine that could result in high probability of death or irreparable injury if proper precautions are not taken.

WARNING:

The signal word “WARNING” denotes that a hazard exists on or near the machine that can result in injury or death if proper precautions are not taken.

CAUTION:

The signal word “CAUTION” is a reminder of safety practices on or near the machine that could result in personal injury if proper precautions are not taken.

Your safety and the safety of others depends significantly upon your knowledge and understanding of all correct operating practices and procedures of this machine.

2.3BEFORE OPERATION CONSIDERATIONS

1.NEVER allow children to operate this riding mower. Do not allow adults to operate this machine without proper instructions.

2.DO NOT mow when children and/or others are present.

3.Clear the area to be mowed of objects that could be picked up and thrown by the cutter blades.

4.DO NOT carry passengers.

It is a distinctive word found on the safety decals on the machine and throughout this manual that alerts the viewer to the existence and relative degree of the hazard.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Direction Reference IntroductionServicing the Engine and Drive Train Components Signal Words Before Operation ConsiderationsBefore Operation Considerations Contd Operation ConsiderationsMaintenance Considerations Operation Considerations ContdStart / Drive Procedure Safety and Instructional Decals Spinning BladeRotating Blades and Belts Electrical EngineTractor Weights and Dimensions Model Tractor ContdCutter Deck Hydraulic SystemSection Operating Instructions Controls and Instrument IdentificationSafety Interlock System Starting the Engine Ground Travel and SteeringForward Travel Reverse Travel Engaging the Deck Drive Cutter BladesParking the Mower Hillside OperationAfter Operation Rotating Blades Removing Clogged MaterialMoving Mower with Engine Stopped Recommendations for MowingAdjusting Cutting Height Deck Release LeverTroubleshooting Cutting Conditions Condition Cause CureTroubleshooting Contd Condition Cause Cure Scalloped Cut, or Rough ContourTroubleshooting Contd GroundParking Brake Adjustment Travel AdjustmentsNeutral Adjustment RH Steering Control Rod AdjustmentTracking Adjustment Throttle Control and Choke AdjustmentsBelt Adjustment Belt AlignmentCutter Deck Level Cutter Deck AdjustmentsCutter Deck Pitch Cutter Deck Height Adjustment Cutter Deck HeightMaintenance Maintenance Chart Recommended Service IntervalsMaintenance Chart Recommended Service Intervals Contd Lubrication Grease Fitting Lubrication Chart see FigureLubrication Fitting Points Checking Hydraulic Oil Level Changing Hydraulic OilChanging Hydraulic Oil Filter Element Engine OILChecking Engine Crankcase Oil Level Changing Engine Crankcase OilEngine AIR Cleaner Engine Fuel SystemChecking Electrolyte Level and Cleaning Battery BatteryCharging the Battery Jump Starting Drive BeltsBlade Sharpening Cutter BladesBlade Replacement TiresCutter Deck Gearbox Checking Lubricant LevelKawasaki Cooling System Checking Coolant LevelChecking The Fan Belt Tension Cleaning the Radiator Debris ScreenBODY, DECK, and Upholstery Section 52 & 61 Cutter Decks 52& 61 Cutter Decks Ref. Part DescriptionCutter Deck CONTROLS, 52 & 61 Decks Cutter Deck CONTROLS, 52 & 61 Decks Part DescriptionSheet Metal Components Sheet Metal Components Deck Drive Components Deck Drive Components Engine and Attaching Parts Kohler Engine and Attaching Parts Kohler Engine and Attaching Parts Kawasaki Engine and Attaching Parts Kawasaki Brake and Steering Components Brake and Steering Components Fuel and Hydraulic System Fuel and Hydraulic System Electrical System Kohler Electrical System Kohler Electrical System Kawasaki Electrical System Kawasaki Hydraulic Pump Assembly Housing Kit Includes Housing, Journal Bearing Replacement Decals and Information Plates Operating Machine2018 Electrical Schematic Kohler Electrical Schematic Kawasaki Limited WARRANTY-COMMERCIAL Equipment 1998

STT specifications

Scag Power Equipment is renowned for producing high-quality outdoor power equipment, and among its impressive lineup is the Scag STT series of zero-turn mowers. These machines are designed for professionals who require efficient, durable, and powerful mowing performance. The STT offers several features that set it apart from the competition, making it a fantastic choice for landscaping and lawn care businesses.

One of the standout features of the Scag STT is its powerful engine options. The mower is available with various engine choices, including the reliable Kawasaki and Kohler engines, which provide ample power to tackle even the toughest mowing tasks. With horsepower ratings reaching up to 25 HP, the STT ensures that operators can efficiently handle large properties and dense grass without any strain.

The STT's innovative design includes a robust steel frame and deck that provide exceptional durability and longevity. The mower's heavy-duty construction ensures it can withstand the rigors of daily professional use. The commercial-grade cutting deck is available in sizes ranging from 48 to 61 inches, allowing for versatility based on the user's specific needs. This deck features Scag's patented design, which enhances airflow for superior cutting performance and an immaculate finish.

Another key characteristic of the STT is its patented Velociti Drive System. This technology allows for faster ground speeds while maintaining optimum control, ensuring that operators can cover large areas quickly without sacrificing mowing quality. Additionally, the STT is equipped with a hydrostatic drive system that provides smooth acceleration and efficient operation, making it easy to navigate around obstacles and tight spaces.

Operators will also appreciate the comfort features incorporated into the STT design. The mower comes with a premium high-back seat, complete with adjustable armrests, which contributes to reduced fatigue during long mowing sessions. The ergonomic control layout, including easy-to-use controls and a spacious operator platform, enhances comfort and usability, making it ideal for professionals who spend hours mowing.

Maintenance is straightforward with the Scag STT, thanks to features like easy-access maintenance components and a simplified grease system. This design minimizes downtime and allows for quick servicing, enabling operators to spend more time on the job.

In summary, the Scag Power Equipment STT combines robust engineering, powerful engine options, and innovative technologies to deliver outstanding mowing performance. Its durability, comfort features, and ease of maintenance make it an excellent choice for landscape professionals looking for a reliable and efficient zero-turn mower for their business.
Top Page Image Contents