Scag Power Equipment STT61V-29KB-DF manual Engine Oil, Engine Fuel System

Page 38

R

Section 7

C. Changing Hydraulic Oil Filter Element

The hydraulic oil filter should be changed after every 500 hours of operation or annually, whichever occurs first.

1.Remove the oil filter element and properly discard it. See Figure 7-3. Fill the new filter with clean oil and install the filter. Hand tighten only.

2.Run the engine at idle speed with the speed control lever in neutral for five minutes.

3.Check the oil level in the hydraulic tank. It must be 3-1/4" inches from the top of the filler neck. If necessary, add SAE 20W50 motor oil.

7.4 Engine Oil

ENGINE OIL

DRAIN

Figure 7-5. Drain Plug Location

C. Changing Engine Oil Filter

ENGINE OIL

DIPSTICK

Figure 7-4. Engine Dipstick Location

A. Checking Engine Crankcase Oil Level

The engine oil level should be checked after every 8 hours of operation or daily as instructed in the Engine Operator’s Manual furnished with this mower.

B. Changing Engine Crankcase Oil

After the first 20 hours of operation, change the engine crankcase oil and replace the oil filter. Thereafter, change the engine crankcase oil after every 100 hours of operation or bi-weekly, whichever occurs first. Refer to the Engine Operator’s Manual furnished with this mower for instructions.

After the first 20 hours of operation, replace the engine oil filter. Thereafter, replace the oil filter after every 200 hours of operation or every month, whichever occurs first. Refer to Engine Operator’s Manual for instructions.

7.5 Engine Fuel System

DANGER

To avoid injury from burns, allow the mower to cool before removing the fuel tank cap and refueling.

A. Filling the Fuel Tank

Fill the fuel tank at the beginning of each operating day to within one (1) inch below the filler neck. Do not overfill. Use clean, fresh unleaded gasoline with a minimum octane rating of 87 and a maximum of 10% Ethanol.

DO NOT use E85 Fuel. Using E85 Fuel will cause severe damage to the engine.

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

34

Page 37 Page 39
Image 38
Page 37 Page 39
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Table of Contents Adjustments Inside Back CoverDirection Reference General InformationIntroduction Servicing The Engine And Drive Train ComponentsSymbols Symbol DescriptionBefore Operation Considerations Safety InformationSignal Words Operation Considerations Section Roll-Over Protection System Foldable Roll-over protection systemFoldable Roll-Over Protection System Maintenance Considerations & Storage Using a spark arrestorSafety And Instructional Decals Install Belt COvER BeforeEngine SpecificationsPower Head ElectricalHydraulic System Weights And DimensionsCutter Deck ProductivityOperating Instructions Controls And Instrument IdentificationSafety Interlock System Dump Valve ControlGround Travel And Steering Initial Run-In ProceduresStarting The Engine Forward TravelEngaging The Deck Drive Cutter Blades Reverse TravelParking The Mower Rotating BladesHillside Operation After OperationRecommendations For Mowing Adjusting Cutting HeightMoving Mower With Engine Stopped Adjusting The Steering Levers Adjusting The Height Adjust PedalTowing Optional Hitch Accessory Troubleshooting Cutting Conditions Condition Cause CureTroubleshooting Cutting Conditions Contd Cut, or Rough ContourScalping Blades Hitting Adjustments Parking Brake AdjustmentTravel Adjustments Neutral AdjustmentThrottle Control and Choke Adjustments Tracking AdjustmentCutter Deck Level Cutter Deck PitchCutter Deck Height Adjustment Cutter Deck HeightCustom-Cut Baffle Adjustment Custom-Cut Baffle AdjustmentElectric clutch adjustment 10. Clutch Air Gap AdjustmentMaintenance Maintenance Chart Recommended Service IntervalsMaintenance Chart Recommended Service Intervals Contd LubricationLubrication Fitting Points Checking Hydraulic Oil Level Changing Hydraulic OilEngine Oil Engine Fuel SystemReplacing In-Line Fuel Filter Elements Lpg fUel systemCleaning and/or Replacing Air Cleaner Element Engine Air CleanerBattery Drive Belts Cutter BladesBlade Replacement Blade SharpeningCooling System TiresCutter Deck Gearbox Checking The Fan Belt Tension Liquid- Cooled Engines Only Cleaning the Radiator Debris ScreenBody, Deck, And Upholstery Illustrated Parts List Section 61V Cutter Deck Description Cutter Deck Controls 481764 Link, Deck Lift Sheet Metal Components Sheet Metal Components Section STT ROLL-OVER Protection System with Suspension Seat 9292 Deck Drive Components Deck Drive Components Engine & Attaching Parts Kubota Dual Fuel Available through the individual engine manufacturer Brake and Steering Components Description Gasoline and Hydraulic System Kubota Dual Fuel Hose Assy, 1/2 ID Tank to Filter Base LP System Kubota Dual Fuel LP System Kubota Dual Fuel Section BDP-16A Hydraulic Pump Assembly with Cooling Fan Hex Screw, Flanged Head M10 x 1.50-65mm Electrical System Kubota Dual Fuel Fuel Pump Replacement Decals and Information Plates Forward R ReverseDUAL-FUEL Electrical Schematic Kubota Dual Fuel Limited Warranty Commercial Equipment

STT61V-29KB-DF specifications

The Scag Power Equipment STT61V-29KB-DF is a robust and powerful zero-turn mower designed for professional landscapers and homeowners seeking superior performance and efficiency. With a 61-inch cut width and a powerful 29 HP Kawasaki engine, this mower offers exceptional cutting capabilities, enabling users to tackle large lawns and challenging terrain with ease.

One of the standout features of the STT61V-29KB-DF is its patented Velocity Plus cutting deck. This innovative design enhances grass flow, resulting in a clean and precise cut. The deck's airflow is optimized to lift the grass for an even cut, ensuring a professional-quality finish every time. The mower's cutting height can be easily adjusted to suit different types of grass and seasonal conditions, providing versatility for various mowing tasks.

In addition to its performance features, the STT61V-29KB-DF is built with durability in mind. The heavy-duty steel frame and reinforced cutting deck provide lasting durability, allowing it to withstand the demands of frequent use in tough environments. The mower also boasts a high-quality paint finish that protects against rust and corrosion, ensuring the machine remains in great condition even after years of use.

The ergonomic design of the STT61V-29KB-DF enhances operator comfort and control. The cushioned seat provides support for long mowing sessions, while the easy-to-use joystick controls allow for smooth maneuverability and precise handling. This design reduces operator fatigue and increases productivity, making it a favorite among landscape professionals.

Another notable technology in the STT61V-29KB-DF is its hydrostatic transmission, which provides seamless speed and direction changes without the need for gear shifting. This feature allows for superior control and responsiveness, especially when navigating around obstacles or tight spaces.

Safety features are also prioritized in the design of this mower. It includes an automatic safety shut-off system that stops the blades when the operator leaves the seat, while the robust structure provides stability on slopes and uneven terrain.

Overall, the Scag Power Equipment STT61V-29KB-DF is a top-tier zero-turn mower that combines power, performance, and user-friendly features, making it an ideal choice for anyone looking to achieve a flawless cut while ensuring maximum operator comfort and safety. With its blend of advanced technologies and durability, this model stands out in the competitive market of landscaping equipment.
Top Page Image Contents