Cleaning and Maintenance Performance Guarantee

CS27505_pg250_IB 8/31/05 5:08 PM Page 10

Cleaning and Maintenance

Performance Guarantee

Clean Your Groomer Regularly

Clean your groomer regularly to ensure your unit’s operating life is not prematurely short- ened.

Cleaning attachments with water

■ Remove attachments.

■ Rinse attachments under warm running

water. Do NOT use hot

water, which may cause damage to components.

■ You can use a hair dryer on a cool or medium heat setting to help dry off the attach- ments, if desired.

!Do not use harsh or corrosive cleaners on the unit or its cutters.

!Do not apply pressure or hard objects to

cutters.

Oiling the blades

If you rinse the attachments, you will need to lubricate the cutter blades once a month with blade oil. Simply spread 1-2 drops of oil lightly over the cutters with your finger-tip. Wipe away any excess oil from the cutters or the groomer.

Oiling cautions

■Use only the light-grade oil like sewing machine oil–these oils will not evaporate and will not slow down the blades.

■Do not use hair oil, grease, or any oil mixed with kerosene or solvent will evaporate and leave the thick oil, slowing the blades.

Cleaning with brush

Thoroughly brush and blow out hair clippings from cutter, bottom of attachments, and top of power handle.

Cleaning the MiniScreen shaver

!Do NOT rinse or oil MiniScreen shaver attachment. The unit is permanently lubricated.

■Press buttons at the ends of the screen head.

■Remove head and shake out the clippings

■Blow off cutter assembly.

■Replace head, making sure it snaps in place.

Troubleshooting

? If the cutters do not move

The cutting unit may be dirty and clogged. Clean and lubricate the unit as described above.

?If the groomer doesn’t work when turned on

It may simply need charging. Follow the instructions for charging on page 6. If charging doesn’t solve the problem, contact an authorized service center.

?If the groomer does not hold a charge Fully discharge the PG-250 by running it until it stops. Then follow the recharging instructions on page 6. If the time between recharging cycles does not increase, the battery may need replacing. Contact an authorized service center.

Battery Removal PG-250

When your rechargable groomer reaches the end of its useful life, the batteries must be removed from the groomer and recycled or disposed of properly in accordance with your local and state requirements.

The following procedure should be followed for battery removal:

■ Make sure your groomer is unplugged form any outlets so you don’t risk an electric shock.

■ Pull or gently pry the clipper halves apart, exposing the batteries.

■Remove batteries from the unit

■Twist batteries to break wires or the wires may also be cut

CAUTION: THESE NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR DISPOSED OF IN ACCORDANCE WITH STATE AND LOCAL REGULATIONS.

Do not burn or mutilate, as they may burst or release toxic materials. Do not short- circut, as this may cause burns.

The EPA-certified RBRC® Battery Recyling Seal on the ncikel-cadmium (Ni-Cd) battery indicates Remington Products Company, L.L.C. is voluntarily participating in an industry program to collect and recyle these battereis at the end of their useful life when taken out of services in the United States or Canada. The RBRC® program provides a convenient alternative to placing used

Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call

1-800-8-BATTERYSMfor information on Ni-Cd battery recycling and disposal bans/restriction in your area. Remington Products Company, L.L.C.’s involvement in this program is part of our commit- ment to preserving our environment and conserving our natural resources.

Full Two-Year Warranty

Rayovac Corporation warrants this product against any defects that are due to faulty material or workmanship for a two-year period from the original date of consumer purchase. This warranty does not include damage to the product resulting from accident or misuse.

If the product should become defective within the warranty period, we will repair it or elect to replace it free of charge. Return your product and sales receipt with your name, address and day time phone number to: Rayovac Corporation, Attention: Consumer Services, 601 Rayovac Drive, Madison, WI 53711. For more information call 800-736-4648.

KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.

This warranty does not cover products damaged by the following:

■Accident, misuse, abuse or alteration of the product

■Servicing by unauthorized persons

■Use with unauthorized accessories

■Connecting it to incorrect current and voltage

■Wrapping cord around appliance causing premature wear & breakage

■Any other conditions beyond our control

No responsibility, obligations, or liability is assumed for the installation or maintenance of this product.

RAYOVAC CORPORATION SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF FITNESS AND MER- CHANTABILITY, ARE LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province. Some states do not allow the exclusion or limitation of incidental, special or consequential damages.