Scag Power Equipment STT-31BSG manual Maintenance Chart Recommended Service Intervals

Section 7

MAINTENANCE

7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS

		HOURS
Break-In 8		40 100 200 500			Procedure	Comments
(First 10)
X					Check all hardware for tightness
X					Check hydraulic oil level	See paragraph 7.3
X					Check all belts for proper alignment	See paragraph 7.8
X					Change engine oil and filter	See paragraph 7.4
(First 5)
X					Check hydraulic hoses for leaks	Use extreme caution when
						checking the hydraulic hoses
						See paragraph 2.5
X					Check coolant level	See paragraph 7.12
	X				Check engine oil level	See paragraph 7.4
	X				*Clean mower	See paragraph 7.14
	X				Check condition of blades	See paragraph 7.9
	X				Apply grease to fittings	See paragraph 7.2
	X				Check tire pressure	See paragraph 7.10
	X				Check coolant level	See paragraph 7.12
			X		Check battery electrolyte level,	See paragraph 7.7
					clean battery posts and cables
			X		Check belts for proper alignment	See paragraph 7.8
				X	Apply grease to fittings	See paragraph 7.2
				X	Change engine oil	See paragraph 7.4
				X	*Clean air cleaner element	See paragraph 7.6

X

Check lubricant in cutter deck gearbox

See paragraph 7.11

* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions

25