Scag Power Equipment STT52V-25CH-LP Starting The Engine, Ground Travel And Steering

Page 18

R

Section 4

4.4 Starting The Engine

CAUTION

DO NOT USE STARTING FLUIDS. Use of starting fluids in the air intake system may be potentially explosive or cause a “runaway” engine condition that could result in engine damage and/or personal injury.

1.Make sure the fuel valve is completely open on the LP tank.

2.Secure the ROPS in the upright and locked position.

3.Sit in the operator’s seat, fasten seat belt and place the steering control levers in the neutral position.

4.Engage the parking brake.

5.Place the PTO switch in the disengaged position.

6.If the engine is cold, choke the engine as needed.

7.Move the engine throttle control to about half engine speed.

8.Turn the ignition key to the START position and release the key as soon as the engine starts. Do not hold the key in the START position for more than 15 seconds at a time. Allow at least 60 seconds between each cranking attempt to prevent overheating of the starter motor. Prolonged cranking can damage the starter motor and shorten battery life.

9.Allow engine to warm before operating the mower.

4.5 Ground Travel And Steering

- IMPORTANT -

If you are not familiar with the operation of a machine with lever steering and/or hydrostatic transmissions, the steering and ground speed operations should be learned and practiced in an open area, away from buildings, fences, or obstructions.

Learn the operation on flat ground before operating on slopes.

Start practicing with a slow engine speed and slow forward travel.

Learn to feather the steering controls to obtain a smooth operating action.

Practice operating the mower until you are comfortable with the controls before proceeding to mow.

Forward Travel

To travel forward with the mower, disengage the parking brake, pull levers inward out of the neutral lock position and slowly push the steering control levers forward an equal distance. The further the steering control levers are pushed forward the greater the forward speed will be. To increase the speed, push the steering control levers further forward and to decrease the speed, pull the steering control levers back.

To stop the forward travel, pull the steering control levers back to the neutral position.

To steer the mower left while traveling forward, pull the left steering lever back. The further the lever is pulled back, the quicker the mower will turn left.

To steer the mower right while traveling forward, pull the right steering control lever back. The further the lever is pulled back, the quicker the mower will turn right.

- NOTE -

Smooth operation of the steering levers will produce smooth mower operation. While learning the operation of the steering controls, keep the travel speed low.

- IMPORTANT -

Do not travel forward over a curb. The mower will hang up on the curb. Raise the deck and travel backwards over the curb at a 45 degree angle. (See Section 4.1, items 12 - 14, on page 13 for cutter deck raising descriptions.)

14

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator STT61V-25CH-LPTable of Contents Troubleshooting Cutting Conditions Adjustments Inside Back CoverDirection Reference General InformationIntroduction Servicing The Engine And Drive Train ComponentsSymbols Symbol DescriptionSafety Information Signal WordsBefore Operation Considerations Know the function of all controls and how to stop quickly Operation ConsiderationsSection Roll-Over Protection System Foldable Roll-Over Protection SystemSeat Belt Inspection Maintenance Considerations & Storage Using a spark arrestorSPARK Ignition System Section Engine SpecificationsPower Head ElectricalHydraulic System Weights And Dimensions 52V 61VCutter Deck Productivity 52V 61VOperating Instructions Controls And Instrument IdentificationSafety Interlock System Initial Run-In ProceduresStarting The Engine Ground Travel And SteeringForward Travel Engaging The Deck Drive Cutter Blades Reverse TravelParking The Mower Rotating BladesHillside Operation After OperationAdjusting Cutting Height Moving Mower With Engine StoppedRecommendations For Mowing Adjusting The Steering Levers Adjusting The Height Adjust PedalTowing Optional Hitch Accessory Troubleshooting Cutting Conditions Condition Cause CureTroubleshooting Cutting Conditions Contd Cut, or Rough ContourScalping Blades Hitting Adjustments Parking Brake AdjustmentTravel Adjustments Neutral AdjustmentThrottle Control and Choke Adjustments Tracking AdjustmentCutter Deck Level Cutter Deck PitchCutter Deck Height Adjustment Cutter Deck HeightCustom-Cut Baffle Adjustment Custom-Cut Baffle AdjustmentElectric clutch adjustment 10. Clutch Air Gap AdjustmentMaintenance Maintenance Chart Recommended Service IntervalsMaintenance Chart Recommended Service Intervals Contd LubricationLubrication Fitting Points Checking Hydraulic Oil Level Changing Hydraulic OilEngine Oil Engine Fuel SystemEngine Air Cleaner BatteryCleaning and/or Replacing Air Cleaner Element Charging the Battery Drive BeltsJump Starting Blade Inspection Blade ReplacementCutter Blades Blade SharpeningCutter Deck Gearbox TiresChecking Lubricant Level Body, Deck, And Upholstery Changing LubricantIllustrated Parts List Scag Approved Attachments and AccessoriesSection Section 52V Cutter Deck DescriptionSection 61V Cutter Deck 461863 Cutter Deck Velocity Plus Cutter Deck Controls 481764 Link, Deck Lift Sheet Metal Components 9278 STT ROLL-OVER Protection System STT ROLL-OVER Protection System STT Suspension Seat Section Deck Drive Components Bolt, Hex Head 3/8-16 x Engine and Attaching Parts Kohler LP Available through the individual engine manufacturer Brake and Steering Components Bolt, Carriage 5/16-18 x Hydraulic System Kohler LP Base LP System Kohler Available through the individual engine manufacturer BDP-16A Hydraulic Pump Assembly BDP-16A Hydraulic Pump Assembly Electrical System Kohler LP Electrical System Kohler LP Heavy-Duty Replacement Decals and Information Plates Electrical Schematic Kohler LP Limited Warranty Commercial Equipment

STT61V-25CH-LP, STT52V-25CH-LP specifications

Scag Power Equipment has long been synonymous with durability and performance in the lawn care industry, and their STT52V-25CH-LP and STT61V-25CH-LP mowers exemplify this commitment. Both models are part of the Scag Turf Tiger II series, designed for commercial landscapers and serious homeowners who demand the best in cutting efficiency and reliability.

The STT52V-25CH-LP features a 52-inch cutting deck, while the STT61V-25CH-LP boasts a 61-inch deck, allowing users to choose according to the size of their lawn or landscape maintenance requirements. The decks are constructed from high-strength steel, ensuring longer life and resistance to wear from heavy use. The signature Velocity Plus deck design enhances airflow for superior cutting quality, resulting in cleaner cuts and better grass dispersal.

Powered by a robust 25 HP Kohler Command Pro engine, both models deliver the necessary power to tackle tough mowing jobs with ease. The engine's exceptional torque and performance ensure that even thick grass doesn't slow these machines down. Additionally, the Kohler engine is designed for improved fuel efficiency, helping operators save on fuel costs during long hours of operation.

One of the standout features of the STT52V-25CH-LP and STT61V-25CH-LP is their advanced hydrostatic transmission, providing smooth and responsive speed control. Operators can effortlessly adjust their speed and direction, making it easy to navigate tight spaces and uneven terrain. The ergonomic operator platform enhances comfort, with padded seats and adjustable armrests allowing for extended periods of mowing without fatigue.

Both models come equipped with a heavy-duty, commercial-grade transmission, capable of withstanding the rigors of daily use in demanding conditions. Additionally, they feature an intuitive control panel, allowing users to easily monitor important metrics, such as fuel levels and hour meters.

For added convenience, these mowers incorporate an easy-access maintenance design, allowing for quick inspections and routine servicing. With a focus on user-friendliness, Scag has ensured that operators can maintain their equipment with minimal downtime.

In summary, the STT52V-25CH-LP and STT61V-25CH-LP from Scag Power Equipment offer a compelling combination of power, performance, and user-friendly features. Ideal for commercial landscapers and serious gardening enthusiasts alike, these mowers stand ready to deliver exceptional results in any mowing environment.
Top Page Image Contents