Mounting the Amplifier Controls and Settings

MOUNTING THE AMPLIFIER

CONTROLS AND SETTINGS

Mount the 6100m or 2100m amplifier in a location that is away from direct contact with water, whether from washing, big waves or soggy riders.

Choose a location in the boat where the amplifier will not be damaged by shifting cargo or passengers. If the amplifier is going to be under a seat, ensure that it is clear of all moving parts and will not affect the seat adjustments.

If mounting the amplifier in an enclosed space, make sure there is plenty of air circulation for the amplifier to cool properly.

POWER CONNECTIONS

The 6100m/2100m amplifiers are capable of delivering high power levels, and require a reliable connection to the boat’s electrical

NOTE: When using the Hi-level inputs, connect the REMOTE terminal to the source unit.

REMOTE OUT

If using additional amplifiers and tower speakers connect the REMOTE OUT terminal using a 1/4" spade connection to the Remote input terminal of the other amplifier. The REMOTE OUT works in conjuction with the Power switch on the microphone (please refer to page 5).

LINE IN

Connect to the source unit’s line-level output using RCA cables.

LINE OUT

Can be used to pass signal from the Line In to additional amplifiers. Also has the option to pass

Setting the controls on the 6100m amplifier or 2100m amplifier.

SETTING THE GAIN

1.Start with the GAIN control set to minimum (counterclockwise) and set the music level on the microphone to maximum (clockwise).

2.Reconnect the negative (–) lead to the boat’s battery. Apply power to the audio system and play a dynamic music track.

3.On the source unit, increase the volume control to 3/4 volume. Slowly increase the GAIN control until you hear slight distortion in the music. Then reduce the GAIN control slightly until distortion is no longer heard.

PAGE EXT SWITCH

When set to the ON position, the Page Ext switch will allow the PA signal to pass through to another amplifier when using the Line Out outputs on the 6100m amplifier. Set to OFF if you do not want the PA signal to pass through to another amplifier and speakers.

system in order to perform optimally. See Figure 8 for terminal location. Please adhere to the following instructions carefully:

GND TERMINAL

Connect the amplifier’s Ground (GND) terminal directly to the boat’s negative (–) battery terminal using a minimum of 8-gauge power wire.

+12V TERMINAL

Connect a minimum of 8-gauge power wire directly to the boat’s positive battery terminal, and install an appropriate fuse holder within 18" of the battery terminal. Do not install the fuse at this time. Route the wire to the amplifier’s location, and connect it to the amplifier’s positive (+12V) terminal. Be sure to use appropriate grommets whenever routing wires through panels. Failure to adequately protect the positive wire from potential damage may result in a fire. When you are done routing and connecting this wire, you may install the fuse at the battery.

NOTE: If your boat uses a multiple battery setup, please contact the boat manufacturer or dealer for proper connection instructions.

REMOTE TERMINAL

Connect the amplifier’s REMOTE terminal to the source unit’s Remote Turn-On lead, using a minimum of 18-gauge wire. If your source unit does not have a remote turn-on connection, connect the amplifier’s REMOTE terminal to the boat’s accessory circuit.

paging information (refer to Page Ext switch).

SPEAKER CONNECTIONS

Refer to the application guides on the pages that follow. Speaker connections should be made using the supplied speaker wires. If additional wire is necessary, use a minimum of 16 awg. speaker wire.

Minimum speaker impedances:

6100m amplifier	4 ohms, stereo
2100m amplifer	2 ohms, stereo/4 ohms, bridged

HI-LEVEL INPUT CONNECTIONS

The 6100m and 2100m amplifiers are equipped with speaker-level inputs that allow you to add an amplifier to head units that do not have RCA line outputs. The speaker outputs for the source unit should be connected to the amplifier using the supplied connector (square four-wire plug). Remember to check for proper polarity.

Figure 7. Speaker-level connector.

HIGH LEVEL

INPUT

+ +

R				L
–				–

GRAY + – WHITE/BLACK

GRAY/BLACK – + WHITE

L R

Speaker Wires

(spliced)

NOTE: When using the Hi-level inputs, the Line Out on the 6100m can be used to pass a full-range line-level signal to another amplifier.

Figure 8. End plates.

REMOTE

OUT

6100m

2100m

2100m, 6100M, 6000M specifications

Infinity 6000M, 6100M, and 2100M are part of a cutting-edge series of multi-purpose devices that cater to various needs, from high-performance computing to user-friendly wireless experiences. Each model comes packed with features that are designed to enhance productivity and deliver streamlined performance.

The Infinity 6000M is renowned for its powerful processing capabilities, accommodating advanced applications like 3D modeling, video editing, and data analysis. Armed with the latest processor technology, it supports multi-core operations, allowing users to run multiple applications simultaneously without compromising performance. The high-resolution display enhances clarity and provides an immersive visual experience, making it ideal for graphic designers and creatives.

On the other hand, the Infinity 6100M focuses on connectivity and mobility. Equipped with cutting-edge wireless technology, including Wi-Fi 6 and Bluetooth 5.0, it enables seamless connections with minimal latency. This model is favored by professionals on the go, as it strikes the perfect balance between performance and portability, allowing users to work effectively from any location. Additionally, its long-lasting battery life ensures uninterrupted usage throughout the workday.

The Infinity 2100M is designed with efficiency and usability in mind. Its compact form factor makes it an excellent choice for users with limited workspace. Despite its smaller size, it boasts an impressive range of features, including fast processing speeds and ample storage capacity. The intuitive interface and smart technology simplify the user experience, making it approachable for all skill levels.

All three models offer robust security features, ensuring that user data remains protected. Advanced encryption standards and biometric authentication provide peace of mind, especially for users handling sensitive information.

Moreover, each model supports various peripherals and expansions, making them adaptable to individual user requirements. Whether you’re a designer requiring high graphics performance with the 6000M, a traveling professional with the 6100M, or someone seeking a compact solution with the 2100M, the Infinity line has something to cater to diverse needs.

In summary, the Infinity 6000M, 6100M, and 2100M epitomize innovation in technology, combining powerful performance, versatility, and user-centric design to meet the demands of modern users across various fields.