Mounting the 6000M Speakers, Connecting the Speakers

MOUNTING THE 6000M SPEAKERS

The 6000m speakers use a unique mounting	SURFACE-MOUNTING	SWIVELING THE SPEAKERS
bracket that works with various tube sizes	Some towers may have a flat support panel used	Located at the base of the speaker mounting
and flat mounting surfaces. The speakers also	to mount accessories such as lighting, board	bracket is a swivel-lock pin. Pull this pin up
incorporate a swivel feature that allows you to	holders, radars, antennas or other accessories.	in order to swivel the speaker 270 degrees at
easily turn them once they’re mounted.	If you wish to mount the 6000m speakers to this	45-degree intervals. Once you have the speaker
TUBE-MOUNTING	panel, use the 2-1/2" screws to clamp the bracket	near the position that you want, release the
TUBE-MOUNTING	together, as shown in Figure 3. Using the four	pin and rotate the speaker until the pin locks
The 6000m speakers can accommodate tower	mounting holes in the top of the bracket, align	in place.
tubes that range from 1-1/2" to 2-1/2" in diame-	the speaker with holes on the mounting plate on
ter. The top of the mounting bracket is made with	the tower. If there are no holes in the panel, use	Figure 4. Pulling the swivel-lock pin up.
two cutouts that allow the bracket to easily	the bracket as a template to mark the locations
adjust to the tower. Simply rotate the bracket	of the four holes. Drill four new holes in the
90 degrees, depending on your application.	panel. DO NOT drill through the holes in the
Position the bottom bracket with the speaker	bracket. Insert the 1-1/4" bolts using the large
and top bracket in place on the tower. Install	washers and tighten using a 5mm hex-key
the supplied 2-1/2" bolts through the top bracket	wrench.
the supplied 2-1/2" bolts through the top bracket	wrench.
and tighten in place using a 5mm hex-key	Figure 3. Surface-mounting.
wrench. While tightening the bolts, keep the	Figure 3. Surface-mounting.
bottom bracket parallel with the top bracket at
bottom bracket parallel with the top bracket at
all four corners of the bracket. Take care not to
overtighten the bracket. See Figure 1. Once the
overtighten the bracket. See Figure 1. Once the
speakers are in position, install the set screws in
the bottom of the bracket to keep the speakers
the bottom of the bracket to keep the speakers
from twisting out of place. See Figure 2.
from twisting out of place. See Figure 2.
NOTE: There are four pre-tapped mounting
NOTE: There are four pre-tapped mounting
holes (1/4-20 thread) on the top of each		Figure 5. Swiveling the speaker.
speaker bracket that can be used for mounting
accessories, such as lighting. See Figure 3.
Figure 1. Clamping the brackets down.

Figure 2. Installing the set screws.

CONNECTING THE SPEAKERS

Connect the speakers to an amplifier using the supplied speaker wires. The weatherproof connectors allow for quick connection and disconnection of the wires when installing and removing the speakers.

NOTE: The white-striped wire is the positive connection.

Run the wires along the tube and secure in place with plastic zip ties. If the tube has wire holes available, run the speaker wires through the tower tubes to the amplifier. Check to make sure the wires will not come in contact with sharp edges or metal that can damage the wires over time.

NOTE: The connectors are keyed to line up properly. Check for proper alignment before connecting.

Figure 6. Key notch.

2100m, 6100M, 6000M specifications

Infinity 6000M, 6100M, and 2100M are part of a cutting-edge series of multi-purpose devices that cater to various needs, from high-performance computing to user-friendly wireless experiences. Each model comes packed with features that are designed to enhance productivity and deliver streamlined performance.

The Infinity 6000M is renowned for its powerful processing capabilities, accommodating advanced applications like 3D modeling, video editing, and data analysis. Armed with the latest processor technology, it supports multi-core operations, allowing users to run multiple applications simultaneously without compromising performance. The high-resolution display enhances clarity and provides an immersive visual experience, making it ideal for graphic designers and creatives.

On the other hand, the Infinity 6100M focuses on connectivity and mobility. Equipped with cutting-edge wireless technology, including Wi-Fi 6 and Bluetooth 5.0, it enables seamless connections with minimal latency. This model is favored by professionals on the go, as it strikes the perfect balance between performance and portability, allowing users to work effectively from any location. Additionally, its long-lasting battery life ensures uninterrupted usage throughout the workday.

The Infinity 2100M is designed with efficiency and usability in mind. Its compact form factor makes it an excellent choice for users with limited workspace. Despite its smaller size, it boasts an impressive range of features, including fast processing speeds and ample storage capacity. The intuitive interface and smart technology simplify the user experience, making it approachable for all skill levels.

All three models offer robust security features, ensuring that user data remains protected. Advanced encryption standards and biometric authentication provide peace of mind, especially for users handling sensitive information.

Moreover, each model supports various peripherals and expansions, making them adaptable to individual user requirements. Whether you’re a designer requiring high graphics performance with the 6000M, a traveling professional with the 6100M, or someone seeking a compact solution with the 2100M, the Infinity line has something to cater to diverse needs.

In summary, the Infinity 6000M, 6100M, and 2100M epitomize innovation in technology, combining powerful performance, versatility, and user-centric design to meet the demands of modern users across various fields.