Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. To input component video signal to COMPUTER IN1/2 port, please see the “Operating Guide” in the CD.
Monitor | PC |
RGB IN | AUDIO OUT | RGB OUT | AUDIO OUT | RGB OUT | USB |
ENGLISH
LR
AUDIO OUT
VIDEO OUT |
LR
AUDIO OUT
LR
AUDIO OUT
YCB/PB CR/PR
COMPONENT VIDEO OUT
LR
AUDIO IN
Speakers
(with an
amplifier)
WARNING ►Do not disassemble or modify the projector and accessories. ►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to connecting them to projector. Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non- accessory cables which may be required a specific length or a ferrite core by the regulations. For cables with a core only at one end, connect the end with the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect connection may result in malfunction or damage to the device and the projector. NOTICE ►Use the cables with straight plugs, not
7
