Turning off the power
1. Press the STANDBY/ON button on the projector or the remote control.
The message “Power off?” will appear on the screen for about 5 seconds.
2. Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.
3. Attach the lens cover, after the POWER indicator turns in steady orange.
STANDBY/ON button
POWER indicator
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY | FREEZE | PAGE | VOLUME |
UP |
| ||
ON |
|
|
|
OFF |
| DOWN | |
KEYSTONE | MY BUTTON | MUTE | |
| 1 |
| 2 |
POSITION |
|
| MENU |
| ENTER |
| |
ESC |
|
| RESET |
ENGLISH
Do not turn the projector on for about 10 minutes or more after turning it off. Turning the projector on again too soon could shorten the lifetime of some consumable parts of the projector.
WARNING ►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be close to the projector and easily accessible.
NOTE • Please power off the projector after any connected devices are powered off.
•This projector has the AUTO OFF function that can make the projector turn off automatically. For more information, please see the “Operating Guide” in the
CD.
11
