Safety Instructions

•Never mow while barefoot or wearing open sandals or thongs. Wear long trousers and heavy shoes

•Know your controls. Read the owner’s manual carefully. Learn how to stop the engine quickly in any emergency

•Make sure the lawn is clear of sticks, stones, bones, wire and debris. They could be thrown by the blade

•Stop the engine and disconnect the spark plug wire before clearing blockages, checking or working on the mower.

•Before using, always inspect to see that blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blade to preserve balance.

DAMAGED BLADES AND WORN BOLTS ARE MAJOR HAZARDS.

•Check all nuts, bolts and screws often; always be sure the mower is in a safe operating condition. Use only genuine replacement parts.

•Refuel outdoors only. Do not smoke while fuelling engine. Add fuel before starting the engine. Never remove the cap off the fuel tank or add petrol while the engine is running or the engine is hot. If petrol is spilled, do not attempt to start the engine but move the machine away from the area of the spill and avoid creating any source of ignition until petrol vapours have dissipated.

•Do not mow whilst people, especially children or pets are in the mowing area.

•Replace worn or faulty silencers (muffler)

•Mow only in good daylight.

•Never use the mower unless the grass catcher or guards (rear flap) provided by the manufacturer are in position.

•Start the engine carefully with feet well away from the blade.

•Do not operate the engine in a confined space where exhaust fumes (carbon monoxide) can collect.

•Stop the engine whenever you leave the mower, even for a moment.

•Do not allow children or people unfamiliar with these instructions to use the mower.

•Store the mower in a well-ventilated room away from naked flames such as may be found in hot water heaters.

•Do not over-speed the engine or alter governor settings. Excessive speed is dangerous and shortens the mower life.

•It is advisable to wear suitable eye protection when operating a mower.

•Turn the fuel off at the conclusion of mowing and reduce the throttle setting during engine

run-out.

•Store fuel in a cool place in a container specifically designed for the purpose. In general, plastic containers are unsuitable.

•Stop the engine, disconnect the spark plug wire and inspect the mower if :

a)the mower begins to vibrate abnormally; or

b)after striking a foreign object.

•Never cut grass while walking backwards.

•Stop the engine before pushing the mower across gravel drives, walkways or roads.

•Walk, never run.

•Mow across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes. Do not mow excessively steep slopes.

•Never pick up or carry a mower when it is operating.

CAUTION

To avoid engine damage drain the oil and fuel from the engine before turning the lawnmower over in any direction.

10124 specifications

The Rover 10124 is a versatile and innovative robotic platform designed for a variety of applications ranging from industrial automation to research and development. This compact robot combines advanced technology with rugged construction, making it suitable for both indoor and outdoor environments.

One of the standout features of the Rover 10124 is its high mobility. It is equipped with all-terrain wheels, allowing it to traverse various surfaces including gravel, grass, and even uneven terrain. This characteristic makes it ideal for tasks that require agility and adaptability, such as surveying, inspection, and delivery in challenging locations.

The Rover 10124 is powered by a state-of-the-art electric propulsion system, ensuring not only high efficiency but also low operational noise. This energy-efficient system allows for extended run times and minimizes the need for frequent recharging, making it practical for long-duration tasks. Additionally, the robot features regenerative braking, which helps in conserving battery life during operations.

In terms of technology, the Rover 10124 incorporates a sophisticated array of sensors that enhance its navigational capabilities. These include LiDAR, ultrasonic sensors, and cameras, enabling the robot to create detailed maps of its surroundings and detect obstacles in real-time. This suite of sensing technology supports autonomous navigation, allowing the Rover to adapt to its environment without human intervention.

User-friendliness is also a hallmark of the Rover 10124. It comes with an intuitive control interface that can be operated remotely via a mobile application or a desktop computer. The interface provides users with real-time feedback and control over the robot’s movements and operations. Furthermore, programmable APIs allow developers to customize the Rover's functionalities for specific applications, promoting user innovation.

Robustness is another key characteristic of the Rover 10124. With its durable chassis and protective casing, the robot is designed to withstand rough handling and exposure to various weather conditions. This resilience is essential for use in fields such as construction, agriculture, and disaster response, where reliability is paramount.

Overall, the Rover 10124 stands out as a dynamic and capable robotic solution. Its combination of mobility, advanced technology, user-friendly interface, and durability makes it a valuable asset across multiple industries, paving the way for increased automation and improved operational efficiency.