Rover 10124 owner manual Operation, Installing the grass catcher- refer figure, Hook

OPERATION

WARNING

Under normal usage the grass catcher material is subject to deterioration and wear, and should be frequently checked for wear or damage. Replace with a genuine Rover grass catcher if found to be damaged.

Installing the grass catcher- refer figure 3

∙Move the throttle control lever to the stop position and wait till the blades have come to a complete stop

∙Raise the rear flap of the mower with one hand and with the other hand raise and position the grass catcher against the rear of the mower.

∙Locate the two hooks on the front of the grass catcher frame into the slots on either side of the rear flap and over the rear flap pivot rod.

Flap rod

Slot in flap

Slot in flap

Hook

Hook

Grass catcher handle

Figure 3. Grass catcher fitment

Removing the grass catcher– refer figure 3

∙Move the throttle control lever to the stop position and wait till the blades have come to a complete stop

∙Raise the flap of the mower with one hand and with the other hand lift the grass catcher up and away from the rear of the mower.

∙Lower the rear flap against the rear of the mower.

WARNING

The grass catcher should only be fitted or removed when the engine is stopped. Never raise the rear flap when the engine is running

4