Rover 10124 Adjusting the height of cut- refer figure, Starting the engine, Stopping the engine

Page 6

Adjusting the height of cut- refer figure 4

The Rover lawnmower has nine height settings controlled by the height adjustment lever located at the rear right hand wheel.

Grasp the height adjustment lever and pull the lever away from the base to disengage it from the locating holes in the base.

Move the lever either forwards or backwards to the desired position and release the lever so as to engage in the base.

Height adjustment lever

Figure 4. height adjustment

Starting the engine

Refer to the engine manufacturer owner’s manual for detailed starting procedure.

Ensure that the engine oil is at the correct level and that the fuel tank is full of fresh unleaded petrol.

Move the throttle control lever to the “START” position.

Prime the engine in accordance with the engine manufacture’s instructions

Grasp the starter cord handle and pull with a quick firm action. Allow the starter cord to recoil back into its housing whilst retaining a grip on the handle. If the engine fails to start repeat till the engine starts

Stopping the engine

Move the throttle control lever to the “STOP” position

Wait till the engine comes to a complete stop before removing or fitting the grass catcher to the mower or attempting any maintenance work on the mower.

MAINTENANCE

WARNING

Before carrying out any maintenance on the mower remove the spark plug lead from the spark plug to prevent accidental starting

Engine air cleaner

Refer to the engine manufacturer owner’s manual for detailed maintenance instructions. The engine air cleaner element must be serviced after every 25 hours of normal mowing. The air cleaner element must be serviced more regularly if the mower is used in dusty conditions. Replace immediately if the air cleaner element is damaged.

Blade- refer figure 4

Check the condition of the blade and central fastener at regular intervals, or after striking a solid object, or if the mower begins to vibrate abnormally. The blade with use, will loose it’s sharp edge and the quality of the grass finish will deteriorate. When this happens the blade should be removed and sharpened or replaced with a new blade.

CAUTION

The blade must be balanced after sharpening

5

Image 6
Contents Domestic Rotary Lawnmower Safety Instructions Damaged Blades and Worn Bolts are Major HazardsManual Contents Carton ContentsIntroduction Engine oil Setting UPHandle bar assembly- refer figure Engine fuelRemoving the grass catcher- refer figure Installing the grass catcher- refer figureOperation HookEngine air cleaner Adjusting the height of cut- refer figureMaintenance Starting the engineBlade Blade removal- refer figureBlade fitting- refer figure Centre bolt & domedWarranty Conditions For your Record

10124 specifications

The Rover 10124 is a versatile and innovative robotic platform designed for a variety of applications ranging from industrial automation to research and development. This compact robot combines advanced technology with rugged construction, making it suitable for both indoor and outdoor environments.

One of the standout features of the Rover 10124 is its high mobility. It is equipped with all-terrain wheels, allowing it to traverse various surfaces including gravel, grass, and even uneven terrain. This characteristic makes it ideal for tasks that require agility and adaptability, such as surveying, inspection, and delivery in challenging locations.

The Rover 10124 is powered by a state-of-the-art electric propulsion system, ensuring not only high efficiency but also low operational noise. This energy-efficient system allows for extended run times and minimizes the need for frequent recharging, making it practical for long-duration tasks. Additionally, the robot features regenerative braking, which helps in conserving battery life during operations.

In terms of technology, the Rover 10124 incorporates a sophisticated array of sensors that enhance its navigational capabilities. These include LiDAR, ultrasonic sensors, and cameras, enabling the robot to create detailed maps of its surroundings and detect obstacles in real-time. This suite of sensing technology supports autonomous navigation, allowing the Rover to adapt to its environment without human intervention.

User-friendliness is also a hallmark of the Rover 10124. It comes with an intuitive control interface that can be operated remotely via a mobile application or a desktop computer. The interface provides users with real-time feedback and control over the robot’s movements and operations. Furthermore, programmable APIs allow developers to customize the Rover's functionalities for specific applications, promoting user innovation.

Robustness is another key characteristic of the Rover 10124. With its durable chassis and protective casing, the robot is designed to withstand rough handling and exposure to various weather conditions. This resilience is essential for use in fields such as construction, agriculture, and disaster response, where reliability is paramount.

Overall, the Rover 10124 stands out as a dynamic and capable robotic solution. Its combination of mobility, advanced technology, user-friendly interface, and durability makes it a valuable asset across multiple industries, paving the way for increased automation and improved operational efficiency.