5H52 Back Position 5H52 Middle Position

3	Using a utility knife, cut the long sides of each wall slot tab and then use a screwdriver to knock it out 6 places on Floor Panel (K-5H52) used in the MIDDLE position and 12 places on Floor Panel
	(K-5H52) used in the Back position.

K-5H52 (BACK POSITION)

4	Place the Floor Panel (J-5H51) on the foundation. Connect two Repeat Floor Panels (K-5H52), install Screws (AA) 14 places.
	Optional Step:
	If desired, recessed anchor locations (8 places) can be used to secure the Floor to the Foundation, see Step 1.

AA (28)

K-5H52 (BACK POSITION)

K-5H52 (MIDDLE POSITION)

J-5H51

Caution: When installing screws do not overtighten.