Quantum Data 700 Series manual Using Test Sequences, Test Menu, Running Test Sequence Manually

Using Test Sequences

Test Menu

Press the Test button to select special test operating modes.

Sequence Mode

Sub-Menu

Burn-In Mode

Sub-Menu

Freq Shift Mode

Sub-Menu

Audio Set-up Sub-Menu

_Sequence______CS1 Probe

_Burn-In DDC_Step

_Freq Shift

_Audio PR Noise

Probe

CS-1 Readings Sub-Menu

DDC Step

Mode

Sub-Menu

Running Test Sequence Manually

The generator includes a test sequence, which specifies a series of format and image combinations. To run the test sequence, select Test > Sequence > Run, and then press the +/- buttons to step through the sequence. Use the menu buttons to gate video color information, change sync types, and turn all signal outputs on and off.

You can use VGM to modify the test sequence (see page 17).

Red Color

Component

ON/OFF

Green Color

Component

ON/OFF

Blue Color

Component

ON/OFF

_Red__SEQ_NAME__ACS

_Grn__Step#xxx__DCS

_Blu___Format___DSS*

_______Image____OUT*

Line 1: Name of Test Sequence currently running.

Line 2: Current step number in sequence

Line 3: Video format used in current step

Line 4: Test image used in current step

ASC - Select Composite

Analog Sync

(Composite Video)

DCS - Select Digital Composite Sync

DSS - Select Digital Separate (H&V) Sync

OUT - All test signal outputs ON/OFF

13