RedMax LRT2300 Operation, Starting Engine Important, Stopping Engine, Adjusting Idling Speed

Page 13

Operation

■STARTING ENGINE IMPORTANT

1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

2.Pump the primer until fuel flows out in the clear tube.

3.Move the choke lever upward to close the choke.

4.Shift the ignition switch to the START position.

5.While pulling the throttle lever with the little finger of your left hand, pull the starter rope briskly.

NOTE

Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

6.When the engine has started, move the choke lever gradually downward to open the choke

7.Allow the engine to warm up for a half minute before starting operation.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine fails to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

■STOPPING ENGINE

1.Release the throttle lever and run the engine for half minute.

2.Shift the ignition switch to the STOP position.

NOTE

Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING IDLING SPEED

1.When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting blades keep moving after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

Warm up the engine before adjusting the idling speed.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 6782-13000906 LRT2300Safety First Contents Information Order to ensure proper and safe operation of your trimmer Safety PrecautionsWork gear and clothing Avoid Noise Problem Things to check before using your trimmerThings to check before starting up the engine  6  Things to be careful about when using Your trimmerHandling of warning labels Part number Where to apply Taking care of warning labelsModel LRT2300 SpecificationsSet up Fuel MIX FuelMixing Fuel Do not USEOperation Adjusting Idling SpeedStarting Engine Important Stopping Engine 12  Regular maintenance inspection MaintenanceQuick TIP BladesGear Case Type of Lubricant to be UsedFuel Filter AIR CleanerSpark Plug Intake AIR Cooling Vent Warning Procedures to be Performed After Every 100 Hours of USEMuffler StorageSpark Arrester Before Storing the TrimmerParts List LRT2300 LRT2300  20   21  Manufacturers Warranty Coverage Model LRT2300 Year Limited Warranty Komatsu Zenoah America INC

LRT2300 specifications

The RedMax LRT2300 is a high-performance line trimmer designed for professional landscapers and groundskeepers, offering a blend of power, efficiency, and advanced engineering. One of its standout features is the lightweight design, ensuring ease of use and comfort during extended work sessions. Weighing in at approximately 10.6 pounds, operators can handle the trimmer with minimal fatigue, making it an excellent choice for long days on the job.

The LRT2300 is equipped with a powerful 23cc engine that delivers impressive cutting performance. This engine is designed for efficiency, enabling users to tackle tough vegetation with ease while maintaining fuel economy. The trimmer features a high-torque output, allowing it to handle thick grass, weeds, and even light brush without bogging down.

One of the key technologies integrated into the LRT2300 is the Easy Start system, which reduces the effort needed to start the engine. This system ensures that operators can get to work quickly without the struggle commonly associated with starting gas-powered tools. Additionally, the trimmer includes a digital ignition, which enhances engine performance and efficiency, providing smoother operation and improved throttle response.

The LRT2300 boasts a robust cutting head, capable of accommodating various trimmer line sizes for enhanced versatility. Users can switch between different line types based on job requirements, whether for precise trimming along edges or aggressive cutting in dense areas. Furthermore, the trimmer features an adjustable handle, allowing for customization based on user preference and comfort.

Durability is a core characteristic of the LRT2300, as it is made with high-quality materials that can withstand the rigors of commercial landscaping. The trimmer's frame and components are designed to resist wear and tear, ensuring long-lasting performance even in demanding environments.

Another notable aspect is the ergonomic design, with anti-vibration technologies that reduce operator fatigue. The padded grips provide additional comfort, enabling users to maintain a firm hold and control during operations.

In summary, the RedMax LRT2300 line trimmer combines power, efficiency, and user-friendly features, making it an ideal tool for professionals in the landscaping industry. Whether for residential gardens or expansive commercial properties, the LRT2300 stands out as a reliable choice that meets the diverse needs of landscape maintenance.
Top Page Image Contents