RedMax LRT2300 manual Blades, Quick TIP, Gear Case, Type of Lubricant to be Used

Page 16

Maintenance

■BLADES

•When refilling the tank or resting, it is often a good idea to use the time to oil the cutting blades.

•If a gap exists between the upper and lower blades, follow the procedure below to adjust them so that they fit more closely together.

1.Loosen lock nut (A) as shown in the diagram.

2.Tighten screw (B) fully, and then turn one-third to one-half of a rotation backward.

3.While holding onto the screw to keep it in position, tighten the lock nut.

4.Check to make sure that the flat washer

(C)is loose enough so that it may be turned by pressing on it with a finger.

NOTE

Screwing in the screw too tightly may make it impossible for the blades to move. Conversely, not screwing in the screw tightly enough may make the blades of the trimmer feel dull and cause leaves and branches to become caught in the blades of the trimmer.

QUICK TIP

If the blades become so worn down that it is no longer possible to eliminate the gap between them, you should contact the authorized RedMax servicing dealer from which you purchased your RedMax® trimmer to have the blades resharpened or replaced.

■GEAR CASE

The inside of the gear case should be lubricant using ZENOAH-approved lubricant after every 20 hours of use.

When adding lubricant, use a grease gun to insert lubricant into the three grease nipples located on the gear case.

TYPE OF LUBRICANT TO BE USED

Always be sure to use #2 lithium heat-resistant lubricant.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents LRT2300 6782-13000906Safety First Contents Information Safety Precautions Order to ensure proper and safe operation of your trimmerWork gear and clothing Avoid Noise Problem Things to check before using your trimmerThings to check before starting up the engine Things to be careful about when using Your trimmer  6 Where to apply Taking care of warning labels Handling of warning labels Part numberSpecifications Model LRT2300Set up Fuel Fuel MIXMixing Fuel Do not USEAdjusting Idling Speed OperationStarting Engine Important Stopping Engine 12  Maintenance Regular maintenance inspectionBlades Quick TIPGear Case Type of Lubricant to be UsedFuel Filter AIR CleanerSpark Plug Procedures to be Performed After Every 100 Hours of USE Intake AIR Cooling Vent WarningStorage MufflerSpark Arrester Before Storing the TrimmerParts List LRT2300 LRT2300  20   21  Manufacturers Warranty Coverage Model LRT2300 Year Limited Warranty Komatsu Zenoah America INC

LRT2300 specifications

The RedMax LRT2300 is a high-performance line trimmer designed for professional landscapers and groundskeepers, offering a blend of power, efficiency, and advanced engineering. One of its standout features is the lightweight design, ensuring ease of use and comfort during extended work sessions. Weighing in at approximately 10.6 pounds, operators can handle the trimmer with minimal fatigue, making it an excellent choice for long days on the job.

The LRT2300 is equipped with a powerful 23cc engine that delivers impressive cutting performance. This engine is designed for efficiency, enabling users to tackle tough vegetation with ease while maintaining fuel economy. The trimmer features a high-torque output, allowing it to handle thick grass, weeds, and even light brush without bogging down.

One of the key technologies integrated into the LRT2300 is the Easy Start system, which reduces the effort needed to start the engine. This system ensures that operators can get to work quickly without the struggle commonly associated with starting gas-powered tools. Additionally, the trimmer includes a digital ignition, which enhances engine performance and efficiency, providing smoother operation and improved throttle response.

The LRT2300 boasts a robust cutting head, capable of accommodating various trimmer line sizes for enhanced versatility. Users can switch between different line types based on job requirements, whether for precise trimming along edges or aggressive cutting in dense areas. Furthermore, the trimmer features an adjustable handle, allowing for customization based on user preference and comfort.

Durability is a core characteristic of the LRT2300, as it is made with high-quality materials that can withstand the rigors of commercial landscaping. The trimmer's frame and components are designed to resist wear and tear, ensuring long-lasting performance even in demanding environments.

Another notable aspect is the ergonomic design, with anti-vibration technologies that reduce operator fatigue. The padded grips provide additional comfort, enabling users to maintain a firm hold and control during operations.

In summary, the RedMax LRT2300 line trimmer combines power, efficiency, and user-friendly features, making it an ideal tool for professionals in the landscaping industry. Whether for residential gardens or expansive commercial properties, the LRT2300 stands out as a reliable choice that meets the diverse needs of landscape maintenance.
Top Page Image Contents