BCZ3050S/T/SW
12. Optional blade usage (for BCZ3050S/SW only)
WARNING
[ BCZ3050T ]
This trimmer is designed for use as a trimmer only.
Metal blades should never be used on this trimmer.
WARNING
•When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.
■CHOOSE THE BLADE
Choose a suitable recommended cutting attachment according to the object to be cut. (OPT3)
•When replacing blade always be sure to use products which have been certified by RedMax.
U S
OPT1 |
(1) |
OPT2 |
IMPORTANT
Change to the cutting attachment guard which is suitable for the metal blade. (OPT1)
TIGHTENING TORQUE :
26~43.5
(1) Guard :
IMPORTANT
[BCZ3050S]
Change the loop handle to the
OPT3 | (1) | (3) | (5) |
| ||
| (2) | (4) | (7) | |||
| (6) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(A)
(B)
(C)
(D)
(1)9”
(2)9”
(3)8”
(4)9”
(5)8”
(6)9”
(7)Nylon line head
(A)Under growth
(B)Heavy weeds
(C)Light weeds
(D)Grass
(1)Bracket :
(2)
OPT4 |
(3) |
(1) |
(2) |
■SET UP THE BLADE
1.Detach the line head assembly. (OPT4)
2.Put on the blade, making the marked side face the shaft side, put the holder and the cover on, and fasten the blade with the nut. (OPT4)
(1)Cover :
(2)Holder (B) :
(3)Nut :
OPT5
■BALANCE UNIT
1.Put on strap and attach unit to strap.
2.Slide clamp up or down until unit balances with head just touching on the ground. (OPT5)