BCZ3050S/T/SW
6. Set up
SE1
(1)
[BCZ3050S]
[BCZ3050T]
[BCZ3050SW] |
SE2 |
(1) |
SE3 |
[BCZ3050SW]
(1) (2)
[BCZ3050S]
[BCZ3050T]
IMPORTANT
Tighten the screws gradually by turns.
■INSTALLING HANDLE
•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1)
(1)About 19 inches (48cm)
(2)About 14.5 inches (37cm)
■HIP PAD
• Fix the tube by the band. (SE2)
(1) Band
■INSTALLING CUTTING ATTACHMENT GUARD
•Put the cutting attachment guard on the braket, attach it with the 2 screws. (SE3)
IMPORTANT
2 kinds of cutting attachment guard are packed in with BCZ3050SW. Choose the guard suitable for a line head. If the right guard is not used, it may lead to a serious accident. (SE3)
(1)Guard for Line Head (Red) :
(2)Guard for Blade (Black) :
SE4
■ INSTALLING LINE HEAD (SE4)
1. While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left-
U
handed)
S
2. Fit the line head assembly to the gear shaft over the holders.
IMPORTANT
•You need not holder (B) and nut when installing the line head.
•Do not attach any metal blade to BCZ3050T.