Maintenance
■HOW TO INSTALL THE AIR INLET SCREEN TO THE VOLUTE COVER
•Put the mark ▲ of the air inlet screen to the mark ● of the volute cover in line.
•Turn the air inlet screen clockwise (arrow direction) and make sure it is firmly installed.
•Install the screw through the stopper to insure that the air inlet screen does not move
■PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE
•Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.
•Tighten all screws, bolts, and fittings.
Storage
BEFORE STORING THE BLOWER:
1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.
2.Remove the spark plug and drop a spoonful of