Home Automation Digital Whole Home Audio Distribution System manual Operation, Zone On/Off

Page 6

Operation

When an audio zone is turned on and the Volume-Source Control (VSC) in that zone is idle, the blue display will show the current volume level of the zone.

VOLUME

PUSH TO SELECT

VSC

You can change the zone power on/off state, select an alternative audio source, and adjust the zone volume by either pressing or turning the knob.

All knob turns are ignored while the knob is being pressed.

Zone On/Off

If a zone is off, it can be turned on by turning the rotary knob at the zone VSC or by pressing the knob. In response, the zone amplifier is turned on.

To turn the zone off, you must turn the knob counterclockwise until the display indicates "00". After five seconds of inactivity, the display on the VSC and the zone amplifier are turned off.

Page 2

Page 5 Page 7
Image 6
Page 5 Page 7
Contents User’s Guide Copyright 2006 Home Automation, Inc All Rights Reserved Precautions Important Safety InstructionsContents Introduction GeneralOperation Zone On/OffSource Selection Setting Zone VolumeAll Zones Off Zone MenuSetting Zone Treble Level Display System Setting Default Value RangeSetting Zone Bass Level Setting Zone Balance LevelAdvanced Menu Setting Source Gain / Connection Status Zone GroupIR Enable / Disable IR Passthrough Enable / DisableSetting Paging Volume Using the Remote Control IR ReceiveLocally Processed IR IR Passthrough IR OutputConnecting Your Music Source RIM/ Mute HAI New Orleans, LA U S a
Top Page Image Contents