IR Receive
When an IR signal is received by the VSC, it is sent directly to the
Locally Processed IR
The twelve items that are locally processed at the amplifier are mute toggle, volume increment, volume decrement, source change (one IR command for each of the six sources), power toggle, power on, and power off. When you press any of these remote buttons, the IR data is sent to the
If the volume increment or decrement IR command is received when the VSC is displaying either the volume or source, then the display on the VSC is updated with the new volume. If the zone is currently muted and the VSC is displaying either the volume or source, then the first volume increment or decrement IR command will turn mute off and any subsequent commands will result in the volume increasing or decreasing. Similarly if any of the source IR commands are received when the VSC is displaying either the volume or source, then the display on the VSC is updated to show the new source.
Using the Remote Control
To use the | 1 | POWER | MUTE |
in the desired zone and press appropriate button(s) |
| 2 | |
as follows: |
|
|
|
SOURCE
1)Power: This button turns the zone on and off.
2)Mute: This button turns mute on and off.
3)Source: These buttons select the audio source to be heard in the zone.
4)Volume Down: This button decreases the volume in the zone.
5)Volume Up: This button increases the volume in the zone.
| 1 | 2 |
|
3 | 3 | 4 |
|
| 5 | 6 |
|
4 | 5 | ||
Page 8