RedMax BT250 manual If Someone Comes, Maintenance, Handling Fuel,  11 

Page 11

5. For safe operation

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance or checking procedures.

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

3.When replacing the cutting attachment or any other part, or when replacing the oil or any lubricant, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.

5.Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.

6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly.

HANDLING FUEL

1.The engine of the RedMax product is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of fuel or

11

Image 11
Contents BT250 Page Contents Safety First 4  SpecificationsParts location  5   6  Symbols on the machineFammille DE Moteur 5HCPS.025ADEM  7  For safe operationWorking Condition Working Circumstance 8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  TransportationInstalling Cutting Head SE3 Set upSE1 SE2 SE3 Installing Handle SE1 Installing Debris Guard SE2Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  14 For Your Engine LIFE, Avoid Fueling the UnitStarting Engine OperationOP1 OP2 OP3 OP4  16 Trimming Grass and Weeds Adjusting Idling Speed OP5OP5 OP6 Stopping Engine Line Head Usage 18  Adjusting the Line Length 19  MaintenanceRefilling Trimming Line  20  Spark Plug MA1 MA2 MA3 MA4AIR Filter Fuel FilterSpark Arrester MA5 22  Muffler 23  Procedures to be Performed After Every 100 Hours of USEMA6 MA7  24  Troubleshooting guideStorage Check Probable Causes Action 25  Parts list 26  Drive Unit BT250 S/N 40400101 and up 27  BT25-50910 Housing Assy 28  Engine Unit BT250 S/N KU40001 and upElement  29 Limited Warranty RedMax Garantie limitée