RedMax BT250 manual MA5,  22 , Muffler, Spark Arrester, Intake AIR Cooling Vent

Page 22

9. Maintenance

MA5

(1)

22

MUFFLER

WARNING

Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, do not use the brushcutter and have it repaired immediately.

Note that failing to do so may result in the engine catching on fire.

SPARK ARRESTER

The muffler is equipped with a spark arrester to prevent red hot carbon from flying out of the exhaust outlet. Periodically inspect and clean as necessary with a wire brush. In the State of California it is required by law (Section 4442 of the California Public Resources Code) to equip a spark arrester when a gas powered tool is used in any forest covered, brush covered, or grass covered unimproved land. (MA5)

(1) Spark arrester

INTAKE AIR COOLING VENT

WARNING

Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

When checking the brushcutter to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Note that failing to do so could cause the muffler to become overheated, and that this in turn could cause the brushcutter to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use.

Check the intake air cooling vent and the area around the cylinder cooling fins after every 25

Image 22
Contents BT250 Page Safety First ContentsParts location Specifications 4   5  Fammille DE Moteur 5HCPS.025ADEM Symbols on the machine 6  Working Circumstance For safe operationWorking Condition  7 Working Plan  8 Starting the Engine Before Starting the Engine 9  Using the Product  10 Handling Fuel MaintenanceIf Someone Comes  11 Transportation  12 Installing Debris Guard SE2 Set upSE1 SE2 SE3 Installing Handle SE1 Installing Cutting Head SE3 14  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, Avoid 16  OperationOP1 OP2 OP3 OP4 Starting EngineLine Head Usage Adjusting Idling Speed OP5OP5 OP6 Stopping Engine Trimming Grass and WeedsAdjusting the Line Length  18 Refilling Trimming Line Maintenance 19   20  Fuel Filter MA1 MA2 MA3 MA4AIR Filter Spark PlugMuffler MA5 22  Spark ArresterMA6 MA7 Procedures to be Performed After Every 100 Hours of USE 23  Check Probable Causes Action Troubleshooting guideStorage  24 Parts list  25 Drive Unit BT250 S/N 40400101 and up  26 BT25-50910 Housing Assy  27 Engine Unit BT250 S/N KU40001 and up  28  29  ElementLimited Warranty RedMax Garantie limitée