Progressive Turf Equipment SDR 90, SDR65 manual Assembly of Spindle

Page 21

ASSEMBLY OF SPINDLE:

Only use a press that has the ram and bed 100% square to each other. If bearings are not square in housing, bearings will wear out prematurely. Press on outer race when inserting into hub and press on inner race when installing on spindle.

If bearings are being changed, be sure to check bearing spacer for wear. If wear is noticed, insert new spacer. This is critical because if spacer is short by only

.010”,thetopbearingwilstarttobind and will result in premature failure.

Bearing with seal and shield combination will be pressed into the blade side of the hub first with the seal side facing out. Next, set spindle on press bed, install dirt shield and shim first (as per diagram) set hub, bearing end down, onto spindle. You must use a tube (Note: both ends must be square) which will slide over spindle and press on inner race of bearing, until seated against shim.

Insert bearing spacer tube with hole end up. Set remaining bearing with shield side up, open side on first, onto spindle. Press on inner race (this bearing will be a loose fit in the hub so it will seat itself properly).

When all parts have been installed on spindle, torque left hand nut to 60 ft- lbs. and then tighten set screws in pulley. Once the assembly is complete, fill with quality grease until it can be seen exiting the top bearing. Rotate the housing six revolutions by hand so the bearings will have the grease worked into them, and at the same time check for free movement. The assembly is now ready for installation into the mower deck.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents OPERATOR’SMANUAL Table of Contents To the Owner Model General InformationFor ALL Applications 12 Months Warranty PolicySafety Operating SafelyWork Safely ---- Follow These Rules SDR-65 SDR-90 SDR Mower SpecificationsObey These Safety Decals Proper Torque for Fasteners Maintenance SafetyDaily Check List Operating the MowerHitching Mower to Tractor Connecting the PTO ShaftAdjusting the PTO shaft to the correct length Cutting Height Adjustment Transporting Mowers Power TAKE-OFFAn Important Word On Grease Compatibility Blade Spindle Greasing LubricationDeck O. ShaftsGearbox OIL Level Maintenance Blade Servicing Blade Sharpening Blade Removal and InstallationSpindle Assembly Installation Spindle Assembly RemovalSpindle Inspection Spindle RepairAssembly of Spindle Vbeltadjustment VbelttensionChecking Belt Tension Problem Cause Remedy Trouble Shooting

SDR 90, SDR65 specifications

Progressive Turf Equipment has made significant strides in the forefront of turf maintenance technology with their innovative SDR65 and SDR90 models. These devices are designed to elevate the efficiency of sports field and turf maintenance, catering to a variety of applications with their advanced features and exceptional build quality.

The SDR65 and SDR90 models are equipped with robust engines that provide optimal power for a range of turf management tasks. Both machines offer high torque output, which ensures that even the toughest mowing conditions can be handled with ease. This is particularly beneficial for maintaining well-manicured sports fields, golf courses, and recreational areas where performance and precision are key.

One of the standout features of these models is the advanced cutting system. The SDR series utilizes a high-frequency cutting action, which allows for cleaner and more efficient cuts. This results in healthier grass, promoting thicker, greener turf. The adjustable cutting heights allow operators to customize their mowing experience according to specific turf needs, enabling versatility for different grass types and conditions.

Furthermore, the SDR65 and SDR90 are designed with user comfort in mind. The ergonomic seating, intuitive controls, and well-placed operator stations reduce fatigue during prolonged use, allowing for longer working hours without compromising efficiency or comfort. The visibility from the operator’s seat is also enhanced, giving a clear view of the mowing path and surrounding areas, promoting safety and precision while operating the machine.

Technology integration in these models is another key feature. Equipped with advanced control systems, the SDR series allows for real-time monitoring of performance metrics such as fuel consumption and engine load. This not only aids in optimizing operation but also provides valuable data for maintenance scheduling, ensuring the longevity of the equipment.

Additionally, both models feature durable construction using high-quality materials designed to withstand harsh working environments. Their compact size allows for maneuverability in tight spaces, making them ideal for various turf conditions, whether it’s on a sprawling field or in confined urban parks.

In conclusion, the Progressive Turf Equipment SDR65 and SDR90 combine power, efficiency, and comfort in an advanced turf maintenance solution. With their innovative features and user-friendly design, they stand out as reliable choices for professionals seeking to enhance the quality of their turf management operations.
Top Page Image Contents