ProForm PFHS70071 manual Choosing a Location for the Restoration

Page 7

CHOOSING A LOCATION FOR THE RESTORATION 2.0

There are many factors to consider when choosing a location to set up the RESTORATION 2.0. These factors vary depending on whether you use the RESTORATION 2.0 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RESTORATION 2.0.

If you set up the RESTORATION 2.0 inside:

1.The RESTORATION 2.0 will increase the level of humidity in your home. The location you choose should be well ventilated. You may need to install a ventilation fan or use a dehumidifier.

2.The location must be close to an electrical outlet.

Do not use an extension cord with the RESTORATION 2.0.

3.The RESTORATION 2.0 should be close to a source of water.

4.Do not use the RESTORATION 2.0 on carpet or other material that may be damaged by moisture. We recommend that you place the RESTORA- TION 2.0 on a water- and stain-resistant, non-slip surface with a floor drain for any water that may splash from the RESTORATION 2.0.

5.Be sure that the location you choose is stable. It must be able to support the weight of the RESTORATION 2.0 when it is filled with water, plus the weight of the occupants. The RESTORA- TION 2.0 weighs approximately 1250 pounds when filled with water.

6.Do not use the RESTORATION 2.0 above a fin- ished living area, due to the risk of water damage.

7.Be sure that there is room around the RESTORA- TION 2.0 to permit servicing of the unit. The dimensions of the spa are: 3Õ7ÓW x 7Õ6ÓL x 2Õ5ÓH. You should allow for this size when choosing the location.

8.The RESTORATION 2.0 is not designed for in- floor installation. However, it is compatible with a deck system that is built flush with the top of the spa, provided you leave access to the motor for service.

9.Be sure to note any other considerations, such as aesthetics or privacy concerns, which may affect the safety or enjoyment of using the RESTORA- TION 2.0.

If you set up the RESTORATION 2.0 outside:

1.You should check your local building codes con- cerning the use of outdoor spas.

2.The location must be close to an electrical outlet.

Do not use an extension cord with the RESTORATION 2.0.

3.The RESTORATION 2.0 should be close to a source of water.

4.We recommend that you place the RESTORA- TION 2.0 on a water- and stain-resistant, non-slip surface. Do not use the RESTORATION 2.0 on rough or sharp surfaces such as gravel or wood chips.

5.Be sure that the location you choose is stable. It must be able to support the weight of the RESTORATION 2.0 when it is filled with water, plus the weight of the occupants. The RESTORA- TION 2.0 weighs approximately 1250 pounds when filled with water.

6.Think about environmental factors, such as rain, wind, shade, sunlight, and so forth.

7.You should be able to monitor the use of the RESTORATION 2.0 from your home, to prevent unauthorized use by children. You may want to enclose the spa with a fence and self-latching gate to prevent unauthorized use.

8.Be sure that there is room around the RESTORA- TION 2.0 to permit servicing of the unit. The dimensions of the spa are: 3Õ7ÓW x 7Õ6ÓL x 2Õ5ÓH. You should allow for this size when choosing the location.

9.The RESTORATION 2.0 is not designed for in- ground installation. However, it is compatible with a deck system that is built flush with the top of the spa, provided you leave access to the motor for service.

10.Be sure to note any other considerations, such as aesthetics or privacy concerns, which may affect the safety or enjoyment of using the RESTORA- TION 2.0.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model No. PFHS70071 Serial No QUESTIONS?Customer HOT Line Limited Five Year Massage SPA Warranty Table of ContentsPage Page Page Before YOU Begin Do not use an extension cord with the Restoration If you set up the Restoration 2.0 insideIf you set up the Restoration 2.0 outside Choosing a Location for the RestorationTools Required for Assembly SET-UP and AssemblyBe careful not to damage the spa shell Mesh Pocket Starting the Restoration Using the RestorationTesting and Treating the Water Plugging in the RestorationSPA JET Operation Using the ConsoleSecuring the SPA Cover Using the Insulation BlanketPosting the Warning Sign Maintenance Draining the Restoration Attaching and Removing the Access CoverWater Chemistry Maintaining the Proper PH BalanceOpening and Closing the CUT-OFF Valves Draining the PumpWinter USE and Care TROUBLE-SHOOTING Symptom the Water is not Being Cleaned by the Filter Symptom the Water Pulsates or There is Minimum Water FlowSymptom the Water Level Drops Qty Description Part LISTÑModel No. PFHS70071Exploded DRAWINGÑModel No. PFHS70071 Ordering Replacement Parts

PFHS70071 specifications

The ProForm PFHS70071 is a cutting-edge piece of fitness equipment designed for those who are serious about their workout routines. This treadmill incorporates advanced technology and a host of features aimed at enhancing user experience and overall effectiveness of workouts.

One of the standout features of the PFHS70071 is its powerful motor, capable of sustaining speeds of up to 12 miles per hour. This allows users to engage in intense running sessions or a gentle walk, making it suitable for all fitness levels. The running surface is spacious, offering ample room for comfortable strides at various speeds.

The treadmill also includes an impressive incline capability of up to 15%. This feature simulates uphill running, significantly increasing workout intensity and helping users build muscle while burning more calories. The digital LED display provides real-time data on important metrics, including distance traveled, speed, time, and calories burned, helping users monitor their progress effectively.

One of the key technologies incorporated in the PFHS70071 is the iFit compatibility. This allows users to access a wide variety of on-demand workouts led by professional trainers. Users can explore numerous routes and landscapes, thanks to the Google Maps integration, which adapts the incline of the treadmill to match the terrain of their selected route. This function keeps workouts fresh and engaging, offering almost limitless workout options.

The ProForm PFHS70071 is also designed with comfort in mind. The treadmill features ProShox cushioning technology, which reduces impact on joints and provides a more comfortable running experience. This is especially beneficial for those who may be prone to injuries or are recovering from them.

Safety is addressed through an emergency stop feature and a spacious safety zone, ensuring that users can exercise without worries. Additionally, the built-in Bluetooth speakers allow users to enjoy their favorite music or podcasts, making workouts more enjoyable.

In summary, the ProForm PFHS70071 treadmill combines power, technology, and user-friendly features to create a versatile fitness experience. It is designed to cater to various workout preferences, making it an ideal choice for both beginners and seasoned athletes looking to enhance their training routine. Whether you're running, walking, or utilizing the innovative iFit program, this treadmill offers a comprehensive solution to meet fitness goals and encourage a healthier lifestyle.
Top Page Image Contents