ProForm PFSB62830 user manual Using the Hydrotherapy Spa, Wiring the Hydrotherapy SPA

Page 10

Using the Hydrotherapy Spa

The hydrotherapy spa is designed to seat five adults. The spa holds 295 gallons of water and offers a heat- ing system (80°F to 104°F), a filtration system, and adjustable hydrotherapy jets. Follow the guidelines below to use and maintain the spa for your long-term enjoyment.

WIRING THE HYDROTHERAPY SPA

The hydrotherapy spa is designed to operate with a 240 volt power source. It must be wired directly into a grounded circuit with a Ground Fault Circuit Interrupter (GFCI) capable of carrying 30 amps. No other appliance should be on the same circuit.

Connection of the spa to the 240 volt power source must be performed by a qualified, licensed electrician and must comply with all local, state, and federal electrical codes. The qualified, licensed electrician can refer to the instructions on the inside of the electronics package for information about con- necting the spa to a 240 volt power source.

Once the spa is filled with water, the power can be turned on. Note: The first time the power is turned on, the spa will start automatically.

TESTING AND TREATING THE WATER

The first time you use the spa, you should test and treat the water. You must also treat the water each time you refill the spa. A test strip and a chemical pack are available at your local pool and spa supplier. Follow the directions carefully on the chemical pack to test and treat the water. Always keep the chemicals away from children and pets.

See WATER CHEMISTRY on page 14 for information concerning proper water maintenance.

STARTING THE HYDROTHERAPY SPA

You should always test the GFCI before using the hydrotherapy spa. First, turn on the spa by pressing

the jet button on the console (see USING THE CON- TROLS on page 12). Once the spa is running, press the GFCI “test” button. The spa should shut off. Press the “reset” button. The spa should resume normal operation. If the spa continues to run after the “test” button is pressed, the GFCI is damaged. Do not use the spa until the GFCI has been repaired or replaced by a qualified electrician.

Once you have tested the GFCI, you should verify the water flow from the pumping unit. Set the air control on the console to the lowest setting (see USING THE CONTROLS on page 12). The pumping unit will heat the water as it pumps. Cover the hydrotherapy spa with the spa cover. The spa cover must be tight (see SECURING THE SPA COVER ON THE SPA below). The water will heat at about 6°F per hour with the cover on. If you are using the spa indoors, and the room temperature is maintained at 70°F, it will take approximately 6 to 8 hours for the water to reach the set temperature.

The temperature and the water flow can be set or changed with the controls on the console (see USING THE CONTROLS on page 12).

SECURING THE SPA COVER ON THE SPA

To secure the spa cover, snap the latches on the

spa cover into the buckles Latch on the cedar panels.

To lock the buckles, insert

 

the key and turn it clock-

Key

wise 1/4 turn. To unlock

 

the buckles, insert the key

 

and turn it counterclock-

Buckle

wise 1/4 turn. Always

 

keep the buckles locked

 

when the spa is not in

 

use. Keep the keys in a safe place, out of the reach of children.

10

Image 10
Contents Model No. PFSB62830 Serial No Customer HOT LineTable of Contents Posting the Warning SignImportant Safety Instructions Read and Follow ALL InstructionsPage Page Before You Begin If you set up the hydrotherapy spa outside If you set up the hydrotherapy spa insideChoosing a Location for the Hydrotherapy Spa Box above and on the previous two pages AssemblyFrom the spa. Be careful not to damage the spa Shell Page Testing and Treating the Water Using the Hydrotherapy SpaWiring the Hydrotherapy SPA Starting the Hydrotherapy SPASpa Shell Diagram Using the Controls Maintenance Maintaining the Proper PH Balance Attaching and Removing Access PanelWater Chemistry Changing the Filter CycleDraining the Pump Replacing the Light BulbTroubleshooting Symptom the Console Displays the Words Cool or ICE Symptom the Console Displays ONEPart List-Model No. PFSB62830 Qty DescriptionExploded Drawing-Model No. PFSB62830 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

PFSB62830 specifications

The ProForm PFSB62830 is a versatile and efficient exercise bike designed for those who are serious about their fitness journey. This model provides a blend of innovative technology and user-friendly features that make it suitable for both beginners and seasoned athletes seeking to enhance their indoor cycling experience.

One of the standout features of the ProForm PFSB62830 is its robust construction. The bike comes with a solid steel frame that ensures stability and durability, making it capable of supporting varied body types and intensities of workouts. With an adjustable seat and handlebars, users can easily customize their riding position for maximum comfort during extended sessions.

The PFSB62830 is equipped with a smooth and quiet magnetic resistance system. This technology allows users to enjoy a nearly silent workout experience, which is perfect for home settings where noise may be a concern. The bike offers multiple resistance levels, providing a tailored workout that can continuously challenge beginners and advanced riders alike.

Integrated into the bike's design is a user-friendly console that displays essential workout metrics such as time, speed, distance, and calories burned. This real-time feedback helps users track their progress and stay motivated throughout their fitness journey. While the bike is efficient for physical activity, it's also equipped to accommodate interactive workouts through compatibility with various fitness apps, promoting a more engaging exercise experience.

Another impressive feature is the ProForm's compact design. Fitting seamlessly into smaller spaces, the bike is often equipped with transport wheels for easy mobility, allowing users to store it away when not in use. This practicality, combined with a sleek aesthetic, makes it a visually appealing addition to any home gym.

In conclusion, the ProForm PFSB62830 stands out for its exceptional build quality, seamless user experience, and adaptability to different fitness levels. Its combination of advanced resistance technology, real-time data tracking, and ease of use makes it a fantastic option for anyone looking to elevate their indoor cycling workouts. Whether you're a beginner easing into fitness or an experienced cyclist, this exercise bike promises to deliver a reliable and motivating workout experience.