ProForm PFSB62830 user manual

Page 9

3.Locate the three pillows. Each pillow can be attached to the spa shell in a high position or a low position. To determine the high and low positions, attach one pillow to the spa shell, note its position, remove it, turn it 180°, and then re-attach it. Attach the three pillows in the desired positions.

3

Pillow

 

Pillow

Pillow

4.The spa operates on a 240 volt power source and must be wired directly to a 30 amp Ground Fault Circuit Interrupter (GFCI) installed in your home. This procedure must be performed by a qualified, licensed electrician. A wiring diagram has been provided on the inside of the electronics package as a reference. Under no circumstances should the spa be wired by someone other than a qualified electrician. Before you have the spa wired, make sure that it is in the desired position and that it can be serviced, if needed.

5.Remove the two warning decals (not shown) from the spa shell. Using a damp cloth, wipe the spa shell clean. Before filling the spa, make sure that it is in the desired position and that there is room to service the spa. Once the spa is filled, it will have to be drained before it can be moved.

Insert a garden hose into the filter housing, and begin filling the spa. Do not use soft water. The spa may be filled with cold water; however, if warm or hot water is used, the spa will be ready for use sooner. Fill the spa until the water is at the level of the molded fill line. Do not overfill the spa.

Refer to the inset drawing. Set the Filter (16), the Cartridge Plug (49), the Diverter Plate (33), and the Basket (43) into the filter housing. Next, screw the Filter Cover (8) into the filter housing until it is fully seated.

6.Pull down one of the straps on the Spa Cover (11) and hold the Buckle (30) against one of the cedar panels on the spa. (Note: To position the Buckle cor- rectly, have a second person hold the strap on the opposite side of the Spa Cover tight.) The Spa

Cover must be tight. Do not place the Buckle over the grooves between the cedar panels. Refer to the inset drawing. Remove the latch from the Buckle. Attach the Buckle to the cedar panel with two #4 x 3/4” Screws (31).

Attach the other three Buckles (30) to the cedar pan- els in the same way.

Remove the Spa Cover (11) from the spa.

5

 

 

8

 

 

33

43

 

 

16

 

 

49

 

 

 

 

 

 

Filter

 

 

 

Housing

 

Garden

Filter

 

 

Housing

 

 

Hose

 

 

6

11

 

 

 

Strap

 

 

 

 

 

 

Latch

 

 

 

30

 

 

 

31

 

 

 

Strap

 

 

30

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Customer HOT Line Model No. PFSB62830 Serial NoPosting the Warning Sign Table of ContentsRead and Follow ALL Instructions Important Safety InstructionsPage Page Before You Begin If you set up the hydrotherapy spa inside If you set up the hydrotherapy spa outsideChoosing a Location for the Hydrotherapy Spa Assembly Box above and on the previous two pagesFrom the spa. Be careful not to damage the spa Shell Page Wiring the Hydrotherapy SPA Using the Hydrotherapy SpaTesting and Treating the Water Starting the Hydrotherapy SPASpa Shell Diagram Using the Controls Maintenance Water Chemistry Attaching and Removing Access PanelMaintaining the Proper PH Balance Changing the Filter CycleReplacing the Light Bulb Draining the PumpTroubleshooting Symptom the Console Displays ONE Symptom the Console Displays the Words Cool or ICEQty Description Part List-Model No. PFSB62830Exploded Drawing-Model No. PFSB62830 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

PFSB62830 specifications

The ProForm PFSB62830 is a versatile and efficient exercise bike designed for those who are serious about their fitness journey. This model provides a blend of innovative technology and user-friendly features that make it suitable for both beginners and seasoned athletes seeking to enhance their indoor cycling experience.

One of the standout features of the ProForm PFSB62830 is its robust construction. The bike comes with a solid steel frame that ensures stability and durability, making it capable of supporting varied body types and intensities of workouts. With an adjustable seat and handlebars, users can easily customize their riding position for maximum comfort during extended sessions.

The PFSB62830 is equipped with a smooth and quiet magnetic resistance system. This technology allows users to enjoy a nearly silent workout experience, which is perfect for home settings where noise may be a concern. The bike offers multiple resistance levels, providing a tailored workout that can continuously challenge beginners and advanced riders alike.

Integrated into the bike's design is a user-friendly console that displays essential workout metrics such as time, speed, distance, and calories burned. This real-time feedback helps users track their progress and stay motivated throughout their fitness journey. While the bike is efficient for physical activity, it's also equipped to accommodate interactive workouts through compatibility with various fitness apps, promoting a more engaging exercise experience.

Another impressive feature is the ProForm's compact design. Fitting seamlessly into smaller spaces, the bike is often equipped with transport wheels for easy mobility, allowing users to store it away when not in use. This practicality, combined with a sleek aesthetic, makes it a visually appealing addition to any home gym.

In conclusion, the ProForm PFSB62830 stands out for its exceptional build quality, seamless user experience, and adaptability to different fitness levels. Its combination of advanced resistance technology, real-time data tracking, and ease of use makes it a fantastic option for anyone looking to elevate their indoor cycling workouts. Whether you're a beginner easing into fitness or an experienced cyclist, this exercise bike promises to deliver a reliable and motivating workout experience.
Top Page Image Contents