Troubleshooting
Symptom |
| Possible Cause |
| Remedy |
Saw does not start when | 1. | No power to line cord. | 1. | Check electrical outlet for power. |
trigger is pulled. | 2. | Switch Lock Button not pushed in | 2. | Press in button while pulling |
|
| while pulling trigger. |
| trigger. |
| 3. | Defective switch. | 3. | Replace switch. |
| 4. | Carbon brushes dirty or worn | 4. | Clean or replace carbon brushes. |
|
| down. |
|
|
While cutting, saw slows down. | Carbon brushes dirty or worn down. | Clean or replace carbon brushes. | ||
Saw blade slips while cutting. | Hex Screw (42) loose. | Securely tighten Hex Screw (42) | ||
Blade Guard (20) sticks or | Debris buildup in the Blade Cover | Remove Saw Blade and clean out | ||
does not open easily. | (11). | Blade Cover (11). | ||
Wood burns or smokes while | Saw Blade dull. | Sharpen or replace Saw Blade. | ||
being cut. |
|
|
|
|
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 94245 | For technical questions, please call | Page 15 |