2Wire 94245 operating instructions Specifications, 25’ 50’ 75’ 100’ 150’

7.Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120/240 VOLT)

NAMEPLATE		EXTENSION CORD
			LENGTH
AMPERES
		25’	50’	75’	100’	150’
(at full load)
0 – 2.0		18	18	18	18	16
2.1	– 3.4	18	18	18	16	14
3.5	– 5.0	18	18	16	14	12
5.1	– 7.0	18	16	14	12	12
7.1 – 12.0		18	14	12	10	-
12.1	– 16.0	14	12	10	-	-
16.1	– 20.0	12	10	-	-	-
TABLE A		* Based on limiting the line volt-
		age drop to five volts at 150% of

the rated amperes.

		Symbology
	Double Insulated
	Canadian Standards Association
	Underwriters Laboratories, Inc.
V~	Volts Alternating Current
A	Amperes
n0 xxxx/min.	No Load Revolutions per Minute
	(RPM)

Specifications
Power Input	120 V~, 60 Hz, 10 A (peak)
Motor	5000 RPM, direct drive
Line Cord	18 AWG x 2
Saw Blade	7-1/4”; 24 tooth carbide tipped
	(included)
Cutting Capacity	2.5” at 90°; 1.7” at 45°
Arbor	5/8”; Spindle lock
Accessories	Blade removal hex wrench
Features	Automatic guard return
Weight	8.6 lb.
Toe Plate	10-5/8” L x 5-3/8” W
	E194601

REV 10e
SKU 94245	For technical questions, please call 1-800-444-3353.	Page 9