McCulloch M4218, M3816 Declaration of Conformity, Troubleshooting Table Cause Remedy

Page 15

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

 

 

 

 

 

 

Engine will not

1. Ignition switch off.

1.

Move ignition switch to ON.

 

start or will run

2. Engine flooded.

2.

See “Difficult Starting” in

 

only a few

 

 

 

Operation Section.

 

seconds after

3. Fuel tank empty.

3.

Fill tank with correct fuel mixture.

 

starting.

4. Spark plug not firing.

4.

Install new spark plug.

 

 

5. Fuel not reaching

5.

Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

 

repair or replace.

 

 

 

 

 

 

 

Engine will

1.

Idle speed requires

1. See “Carburetor Adjustment” in the

 

not idle

 

adjustment.

 

Service and Adjustments Section.

 

properly.

2.

Carburetor requires

2. Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

 

Engine will not

1.

Air filter dirty.

1. Clean or replace air filter.

 

accelerate,

2.

Spark plug fouled.

2. Clean or replace plug and regap.

 

lacks power,

3.

Chain brake engaged.

3. Disengage chain brake.

 

or dies under

4.

Carburetor requires

4. Contact an authorized service dealer.

 

a load.

 

adjustment.

 

 

 

 

 

 

 

 

 

 

Engine

1.

Too much oil mixed with

1.

Empty fuel tank and refill with

 

 

smokes

 

gasoline.

 

correct fuel mixture.

 

excessively.

 

 

 

 

 

 

Chain moves

1. Idle speed requires

1. See “Carburetor Adjustment” in the

 

at idle speed.

 

adjustment.

 

Service and Adjustments Section.

 

 

2. Clutch requires repair.

2.

Contact an authorized service dealer.

DECLARATION OF CONFORMITY

EC Declaration of Conformity (Only applies to Europe)

We, Husqvarna Outdoor Products Italia, S.p.A., Valmadrera, Italy. Tel: +39--0341--203211, declare that the chain saw models McCulloch M3816 and M4218 CSI---AVfrom serial numbers 2008--040(N or D) 00001 and onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVES:

of 22 June 1998 “relating to machinery” 98/37/EC, annex IIA;

of 3 May 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements; and

of 8 May 2000 “relating to the noise emissions in the environment” in accordance with Annex V of 2000/14/EC. The measured sound power is 108 dB(A), the guaranteed sound power is 118 dB(A) and the net power is 1,6 kW or 1,7 kW.

The following standards have been applied: ISO 11681-1:2004, EN/ISO 12100-1:2003,

EN/ISO 12100-2:2003, and CISPR 12:2001.

Notified body, 0404 the Swedish Machinery Testing Institute, Fyrisborgsgatan 3 S--754 50 Uppsala, Sweden, has carried out EC type approval. The certificate(s) is numbered: 404/02/901.

The supplied Chain Saw conforms with the sample that underwent the EC type approval.

08--02--09

Michael S. Bounds, Director

Product Safety and Standards

Handheld Consumer Products

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSManual do Operador Identification of Symbols Identification What is WHAT?Operating the chain saw Safety RulesPlan Ahead Operate Your SAW SafelyJustments Chain SAW Safety EquipmentMaintain Your SAW in Good Working Order Handle Fuel with CautionKickback Reduce the Chance KickbackMaintain Control Assembly Kickback Safety FeaturesAttaching the Bumper Spike Cutters Must Face Direction of Rotation Tensioning Lever Install PositionAttaching the BAR & Chain If To Replace Chain BrakeChain SAW in Upright Position Chain Tension Including units with chain already installedOperating Your Unit Before Starting Engine BAR and Chain LubricationStarting a Warm Engine Fueling EngineChain Brake Important Points to RememberTree Felling Techniques Cutting MethodsChain Brake Important PointsImportant points Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsAIR Filter Service and AdjustmentsCleaning the air filter BAR MaintenanceIdle Speed---T Carburetor AdjustmentsSpark Plug Chain SharpeningTroubleshooting Table Cause Remedy Load Adjustment EngineDeclaration of Conformity Technical Data Sheet Statement of Warranty

M4218, M3816 specifications

The McCulloch M3816 and M4218 are powerful chainsaws designed for both homeowner and professional use, combining reliability and advanced technology to handle a variety of cutting tasks. These models reflect McCulloch’s commitment to creating tools that offer performance and ease of use for a diverse range of users.

The McCulloch M3816 features a 38cc engine that delivers robust power while maintaining a lightweight profile, making it manageable for extended use. With its 16-inch bar and chain, it provides an ideal balance of cutting capability and maneuverability. The M3816 includes an automatic oiling system that ensures proper lubrication of the chain and bar, enhancing cutting efficiency and prolonging the life of the tool. Its comfortable handle design minimizes vibration, reducing fatigue during long working sessions.

On the other hand, the McCulloch M4218 is equipped with a more powerful 42cc engine, ideal for users who require a heavier-duty tool. This model supports a longer 18-inch bar, making it suitable for larger logs and more extensive cutting tasks. The M4218 also benefits from the automatic oiling system, ensuring optimal performance and less maintenance time. Both chainsaws incorporate an efficient air filtration system that keeps the engine cleaner, improving performance and longevity.

One of the key technologies found in both models is the Easy Start system. This innovation allows for a smoother pull, reducing the effort required to start the chainsaw. Additionally, both the M3816 and M4218 are designed with a tool-free chain tensioning feature, making adjustments quick and convenient without the need for specialized tools.

Safety is paramount in chainsaw design, and both models come equipped with essential safety features such as a chain brake that stops the chain instantly if the saw kicks back, and a safety throttle lock that prevents accidental start-up.

In conclusion, the McCulloch M3816 and M4218 chainsaws blend powerful engines, versatile bar lengths, and smart engineering solutions into user-friendly tools. They are ideal for anyone from casual users to professionals looking for dependable performance in their cutting tasks. Whether for tree pruning, firewood preparation, or larger cutting jobs, these chainsaws offer an excellent combination of features and technologies to meet diverse needs.
Top Page Image Contents