McCulloch M4218, M3816 Safety Rules, Plan Ahead, Operate Your SAW Safely, Operating the chain saw

Page 3

IDENTIFICATION OF SYMBOLS

Starting Reminder

Move ON/STOP switch to the ON position.

Slowly press primer bulb 6 times.

Pull choke/fast idle lever out to the full extent (to the FULL CHOKE posi- tion).

Pull the starter rope sharply 5 times with your right hand.

Push the choke/fast idle lever in to the HALF CHOKE position.

Pull the starter rope sharply with your right hand until the engine starts.

SAFETY RULES

WARNING: Always disconnect spark plug wire and place wire where it can- not contact spark plug to prevent accidental starting when setting up, transporting, ad- justing or making repairs except carburetor adjustments.

Because a chain saw is a high-speed wood- cutting tool, special safety precautions must be observed to reduce the risk of accidents. Careless or improper use of this tool can cause serious injury.

PLAN AHEAD

S Read this manual carefully until you com- pletely understand and can follow all safety rules, precautions, and operating instruc- tions before attempting to use the unit.

SRestrict the use of your saw to adult users who understand and can follow safety rules, precautions, and operating instruc- tions found in this manual.

Hearing

Safety Hat

Protection

Eye

 

Snug

Protection

 

Fitting

Heavy Duty

Clothing

Gloves

Safety

Safety Chaps

Shoes

 

SWear protective gear. Always use steel-toed safety footwear with non-slip soles; snug-fit- ting clothing; heavy-duty, non-slip gloves; eye protection such as non-fogging, vented goggles or face screen; an approved safety hard hat; and sound barriers (ear plugs or mufflers) to protect your hearing. Secure hair above shoulder length.

SAlways use approved hearing protection. Regular users should have hearing checked regularly as chain saw noise can damage hearing. Long--term exposure to

noise can result in permanent hearing im- pairment.

SKeep all parts of your body away from the

chain when the engine is running.

SKeep children, bystanders, and animals a minimum of 10 Meters away from the work area. Do not allow other people or animals to be near the chain saw when starting or

operating the chain saw.

SDo not handle or operate a chain saw when you are fatigued, ill, or upset, or if you have taken alcohol, drugs, or medication. You must be in good physical condition and men- tally alert. Chain saw work is strenuous. If you have any condition that might be aggra- vated by strenuous work, check with your doctor before operating a chain saw.

SCarefully plan your sawing operation in ad- vance. Do not start cutting until you have a clear work area, secure footing, and, if you are felling trees, a planned retreat path.

OPERATE YOUR SAW SAFELY

WARNING: Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can result in serious per- sonal injury.

SDo not operate a chain saw with one hand. Serious injury to the operator, helpers, by- standers or any combination of these per- sons may result from one-handed opera-

tion. A chain saw is intended for two- handed use.

SOperate the chain saw only in a well-venti-

lated outdoor area.

SDo not operate saw from a ladder or in a tree, unless you are specifically trained to do so.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSManual do Operador Identification of Symbols Identification What is WHAT?Operating the chain saw Safety RulesPlan Ahead Operate Your SAW SafelyJustments Chain SAW Safety EquipmentMaintain Your SAW in Good Working Order Handle Fuel with CautionKickback Reduce the Chance KickbackMaintain Control Assembly Kickback Safety FeaturesAttaching the Bumper Spike Cutters Must Face Direction of Rotation Tensioning Lever Install PositionAttaching the BAR & Chain If To Replace Chain BrakeChain SAW in Upright Position Chain Tension Including units with chain already installedOperating Your Unit Before Starting Engine BAR and Chain LubricationStarting a Warm Engine Fueling EngineChain Brake Important Points to RememberTree Felling Techniques Cutting MethodsChain Brake Important PointsImportant points Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsAIR Filter Service and AdjustmentsCleaning the air filter BAR MaintenanceIdle Speed---T Carburetor AdjustmentsSpark Plug Chain SharpeningTroubleshooting Table Cause Remedy Load Adjustment EngineDeclaration of Conformity Technical Data Sheet Statement of Warranty

M4218, M3816 specifications

The McCulloch M3816 and M4218 are powerful chainsaws designed for both homeowner and professional use, combining reliability and advanced technology to handle a variety of cutting tasks. These models reflect McCulloch’s commitment to creating tools that offer performance and ease of use for a diverse range of users.

The McCulloch M3816 features a 38cc engine that delivers robust power while maintaining a lightweight profile, making it manageable for extended use. With its 16-inch bar and chain, it provides an ideal balance of cutting capability and maneuverability. The M3816 includes an automatic oiling system that ensures proper lubrication of the chain and bar, enhancing cutting efficiency and prolonging the life of the tool. Its comfortable handle design minimizes vibration, reducing fatigue during long working sessions.

On the other hand, the McCulloch M4218 is equipped with a more powerful 42cc engine, ideal for users who require a heavier-duty tool. This model supports a longer 18-inch bar, making it suitable for larger logs and more extensive cutting tasks. The M4218 also benefits from the automatic oiling system, ensuring optimal performance and less maintenance time. Both chainsaws incorporate an efficient air filtration system that keeps the engine cleaner, improving performance and longevity.

One of the key technologies found in both models is the Easy Start system. This innovation allows for a smoother pull, reducing the effort required to start the chainsaw. Additionally, both the M3816 and M4218 are designed with a tool-free chain tensioning feature, making adjustments quick and convenient without the need for specialized tools.

Safety is paramount in chainsaw design, and both models come equipped with essential safety features such as a chain brake that stops the chain instantly if the saw kicks back, and a safety throttle lock that prevents accidental start-up.

In conclusion, the McCulloch M3816 and M4218 chainsaws blend powerful engines, versatile bar lengths, and smart engineering solutions into user-friendly tools. They are ideal for anyone from casual users to professionals looking for dependable performance in their cutting tasks. Whether for tree pruning, firewood preparation, or larger cutting jobs, these chainsaws offer an excellent combination of features and technologies to meet diverse needs.
Top Page Image Contents